Difficulty

Moderate

Steps

7

Time Required

Suggest a time??

Sections

2

  • Back Cover
  • 3 steps
  • LCD Screen
  • 4 steps

Flags

1

Incorrect Tools

Help make this guide better by using the correct tools in images and/or text.

  • BackSony Cyber-shot DSC-W5

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Back Cover
  • Remove Memory Stick Pro from the card reader slot on the bottom of the camera.
  • Remove both batteries.

Remove Memory Stick Pro from the card reader slot on the bottom of the camera.

Remove both batteries.

1024

Step 2

  • Remove the single visible screw from both sides of the camera.
  • Remove the two screws that are adjacent to the warning label, which is on the underside of the camera.
  • Do NOT remove all four screws from the bottom.

Remove the single visible screw from both sides of the camera.

Remove the two screws that are adjacent to the warning label, which is on the underside of the camera.

Do NOT remove all four screws from the bottom.

Step 3

  • Gently remove the back cover from the camera.
  • The first time the case is removed, it will be stiff. Be patient and gently rock the cover back and forth until it slides free.

Gently remove the back cover from the camera.

The first time the case is removed, it will be stiff. Be patient and gently rock the cover back and forth until it slides free.

Step 4

              LCD Screen
  • Remove the two screws holding the circuit board down.

Remove the two screws holding the circuit board down.

Step 5

  • Detach the orange cable from the board.
  • Use a thin object, like a paperclip, to gently pry the cable off the connector.

Detach the orange cable from the board.

Use a thin object, like a paperclip, to gently pry the cable off the connector.

Step 6

  • The LCD screen sits in two slots; one on the bottom, and one on the left edge.
  • Slide LCD screen from the two slots.
  • Do not attempt to completely remove the screen, as it is still attached to the camera.

The LCD screen sits in two slots; one on the bottom, and one on the left edge.

Slide LCD screen from the two slots.

Do not attempt to completely remove the screen, as it is still attached to the camera.

Step 7

  • To remove the LCD screen, detach the orange cable from the board.
  • If needed, replace the LCD screen.

To remove the LCD screen, detach the orange cable from the board.

If needed, replace the LCD screen.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      4 other people completed this guide.

Author

                                      with 8 other contributors 


                    Thomas

Member since: 04/14/2010

133 Reputation

                                      6 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges

Team

                       Cal Poly, Team 15-50, Garner Spring 2010                        

                                                  Member of Cal Poly, Team 15-50, Garner Spring 2010 



                    CPSU-GARNER-S10S15G50                     


                                            5 Members                     


                                            12 Guides authored