Difficulty

Moderate

Steps

5

Time Required

Suggest a time??

Sections

1

  • Door
  • 5 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackSony Cyber-shot DSC-W730 DSC-W830

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Determining your Problem
  • make sure your door slider tab is in good shape. If the tab is damaged you will need a door replacement.
  • make sure your tab notches are in good shape. If there is a problem with the notches then you will need to replace the front housing cover of the unit.
  • If your door closes but looks like the unit in the 3rd picture then your door is either bent and damaged or the unit may not be assembled properly.

make sure your door slider tab is in good shape. If the tab is damaged you will need a door replacement.

make sure your tab notches are in good shape. If there is a problem with the notches then you will need to replace the front housing cover of the unit.

If your door closes but looks like the unit in the 3rd picture then your door is either bent and damaged or the unit may not be assembled properly.

1024

Step 2

              Removing Rear Housing Case
  • Remove 6 external screws from the casing. They are all the same size. I recommend using Phillips screwdriver size PH000
  • Remove the rear casing. You may need a spudger to release the tab. The tab is a depression style tab

Remove 6 external screws from the casing. They are all the same size. I recommend using Phillips screwdriver size PH000

Remove the rear casing. You may need a spudger to release the tab. The tab is a depression style tab

Step 3

  • remove side panels

remove side panels

Step 4

  • Remove side panels and then remove front cover

Remove side panels and then remove front cover

Step 5

  • Remove door rod
  • Remove door assembly and replace with new door. Reverse process to assemble unit
  • There is a little hole shown in the picture where the wire spring goes into.. make sure the wire spring is inserted into that hole or your door will not function.

Remove door rod

Remove door assembly and replace with new door. Reverse process to assemble unit

There is a little hole shown in the picture where the wire spring goes into.. make sure the wire spring is inserted into that hole or your door will not function.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    Sales Cameraparts4you

Member since: 07/01/2016

3,042 Reputation

                                      20 Guides authored                  



                       Badges:
                       17







                                                        +14 more badges