Sony Cyber Shot Dsc W830 Lcd Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          10 minutes

Sections

Battery
3 steps
Front and Back Panel
3 steps
Button Board
2 steps
LCD
2 steps

Flags

BackSony Cyber-Shot DSC-W830
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Battery

Slide the lock at the bottom of the camera to “Open”.
The door to the battery pack is spring loaded.

Slide the lock at the bottom of the camera to “Open”.

The door to the battery pack is spring loaded.

1024

Step 2

Slide the blue clip up and away from the battery.

Slide the blue clip up and away from the battery.

Step 3

Remove the battery.

Remove the battery.

Step 4

              Front and Back Panel

Remove the six 3.5mm Phillips #000 screws.
Rotate the lock away from the camera.

Remove the six 3.5mm Phillips #000 screws.

Rotate the lock away from the camera.

Step 5

Pry the device open with the plastic opening tool.
There are two clips that help prevent the front panel from separating.

Pry the device open with the plastic opening tool.

There are two clips that help prevent the front panel from separating.

Step 6

Remove the two plastic spacers between the front and the back panels.
The spacers may fall out when removing the panels.
Carefully remove the back panel.

Remove the two plastic spacers between the front and the back panels.

The spacers may fall out when removing the panels.

Carefully remove the back panel.

Step 7

              Button Board

Gently release the button board from the clips.
Be careful when lifting the button board; the ribbon cable will still be attached.

Gently release the button board from the clips.

Be careful when lifting the button board; the ribbon cable will still be attached.

Step 8

Disconnect the no-fuss ribbon cable by gently pulling it out of the button board.

Disconnect the no-fuss ribbon cable by gently pulling it out of the button board.

Step 9

LCD

Push the bottom right corner of the LCD screen out and slide it to the right to release it from the clips.
Be careful when lifting the LCD screen; the ribbon cable will still be attached.

Push the bottom right corner of the LCD screen out and slide it to the right to release it from the clips.

Be careful when lifting the LCD screen; the ribbon cable will still be attached.

Step 10

Grasp the no-fuss ribbon cable and gently pull it out from the motherboard.

Grasp the no-fuss ribbon cable and gently pull it out from the motherboard.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      4 other people completed this guide.

Author

                                      with 5 other contributors

                    Addyson Salalila

Member since: 09/15/2016

297 Reputation

                                      2 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       USF Tampa, Team 17-1, Blackwell Fall 2016                        

                                                  Member of USF Tampa, Team 17-1, Blackwell Fall 2016 



                    USFT-BLACKWELL-F16S17G1                     


                                            4 Members                     


                                            6 Guides authored

tajbhatnagar - May 21, 2018

hii

plaz help me

pless need a sony dsc-‘‘‘‘‘wx’’’’’ 830 display LED

tajbhatnagar - May 24, 2018

Sony Cyber-Shot DSC-W830 LCD ……WowObjects LCD Display Screen For SONY DSC-W150 same hai ya different hai

Tamil Varshitha - Jul 25, 2021

Hi I need a one DSC w810 display how much. ?

How can contact you ?

Sony dsc s2000 model camera need

Display & lens unit

Introduction#

What you need#

Team#

Introduction

What you need

Team