Sony Cyber Shot Dsc Wx350 Flash Assembly Replacement Repair Guide

Difficulty

Moderate

Steps

10

Time Required

                          10 minutes            

Sections

1

• Flash Assembly
• 10 steps

Flags

0

• BackSony Cyber-shot DSC-WX350

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Flash Assembly               

• Remove 6 black Phillips 4 mm screws using the J00 head screwdriver tip from the sides and bottom of top cover.

Remove 6 black Phillips 4 mm screws using the J00 head screwdriver tip from the sides and bottom of top cover.

1024

Step 2

• Remove the black Phillips 4 mm screw using the J00 head screwdriver tip from inside the battery inclosure.

Remove the black Phillips 4 mm screw using the J00 head screwdriver tip from inside the battery inclosure.

Step 3

• Use the plastic opening tool to take back cover off. Then take out the LCD screen with your hand.

Use the plastic opening tool to take back cover off. Then take out the LCD screen with your hand.

Step 4

• Now take the control wheel board out with your hand.

Now take the control wheel board out with your hand.

Step 5

• On the left side of the camera, pull the LCD off the back plate.
• There will be a ZIF connector by the control wheel, release the connector and remove the LCD.

On the left side of the camera, pull the LCD off the back plate.

There will be a ZIF connector by the control wheel, release the connector and remove the LCD.

Step 6

• Remove silver Phillips 4 mm screws using the J00 head screwdriver tip from the metal cover. Once done take the metal cover off with your hands.

Remove silver Phillips 4 mm screws using the J00 head screwdriver tip from the metal cover. Once done take the metal cover off with your hands.

Step 7

• Using your finger open take off the three zifs.

Using your finger open take off the three zifs.

Step 8

• Use your hand to take out the lens assembly. Then take out the motherboard assembly with your hand.

Use your hand to take out the lens assembly. Then take out the motherboard assembly with your hand.

Step 9

• Remove the silver Phillips 4 mm screws using the J00 head screwdriver tip from the metal piece and remove the 4mm screws from the metal piece lining the lens assembly hole.

Remove the silver Phillips 4 mm screws using the J00 head screwdriver tip from the metal piece and remove the 4mm screws from the metal piece lining the lens assembly hole.

Step 10

• Grab the top of the camera and take it out. Then grab the flash assembly and slide it out.

Grab the top of the camera and take it out. Then grab the flash assembly and slide it out.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      4 other people completed this guide.                                             

Author

                                      with 4 other contributors 

                    Matt Garthwaite                     

Member since: 05/22/2017

125 Reputation

                                      1 Guide authored                  



                       Badges:
                       5







                                                        +2 more badges                           

Team

                       IUPUI, Team S1-G1, Wilson Summer 2017                        

                                                  Member of IUPUI, Team S1-G1, Wilson Summer 2017 



                    IUPUI-WILSON-SU17S1G1                     


                                            4 Members                     


                                            3 Guides authored