Sony Dcr Dvd 108 Front And Back Lens Replacement Repair Guide

Difficulty

Moderate

Steps

10

Time Required

                          5 seconds            

Sections

2

• Sony DCR-DVD 108 Case Disassembly
• 5 steps
• Front and Back Lens
• 5 steps

Flags

0

• BackSony DCR-DVD 108

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Sony DCR-DVD 108 Case Disassembly               

• Remove all the 4.3mm screws on the bottom using a J000 Phillips screwdriver. There should be seven screws (4 silver, 2 black).

Remove all the 4.3mm screws on the bottom using a J000 Phillips screwdriver. There should be seven screws (4 silver, 2 black).

1024

Step 2

• Remove the 5mm #0 Phillips screws on the underside of the LCD tuck-a-way.

Remove the 5mm #0 Phillips screws on the underside of the LCD tuck-a-way.

Step 3

• Remove the 2mm #0 Phillips screw behind the battery.

Remove the 2mm #0 Phillips screw behind the battery.

Step 4

• Open the dvd cover and remove the 3 4.3mm phillips screws. Including ones in the corners that may be hidden.

Open the dvd cover and remove the 3 4.3mm phillips screws. Including ones in the corners that may be hidden.

Step 5

• Once all the screws are removed you can safely pry open the camera case using a spudger.

Once all the screws are removed you can safely pry open the camera case using a spudger.

Step 6

              Front and Back Lens               

• Take the half of camera containing both lens components and turn front portion towards you.
• Remove the four 4.3mm Phillips #0 screws pictured.

Take the half of camera containing both lens components and turn front portion towards you.

Remove the four 4.3mm Phillips #0 screws pictured.

Step 7

• Remove front lens and inspect for “dirt,” smudges. or scratches. Use discretion, if lens appears too damaged, replace part.

Remove front lens and inspect for “dirt,” smudges. or scratches. Use discretion, if lens appears too damaged, replace part.

Step 8

• Gently pull lens housing to expose housing channel.

Gently pull lens housing to expose housing channel.

Step 9

• With the pointed end of a plastic spudger, press latch located on the side of rear lens housing.

With the pointed end of a plastic spudger, press latch located on the side of rear lens housing.

Step 10

• Once loosened gently pull and remove lens housing. The lens should now be free to inspect and replace.

Once loosened gently pull and remove lens housing. The lens should now be free to inspect and replace.

In order to reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 

                    Elijah DeWolf                     

Member since: 02/09/2016

577 Reputation

                                      5 Guides authored                  



                       Badges:
                       13







                                                        +10 more badges                           

Team

                       USF Tampa, Team 7-6, Cheng Spring 2016                        

                                                  Member of USF Tampa, Team 7-6, Cheng Spring 2016 



                    USFT-CHENG-S16S7G6                     


                                            3 Members                     


                                            10 Guides authored