Difficulty
Moderate
Steps
9
Time Required
20 minutes
Sections
2
- Back Cover
- 6 steps
- Screen
- 3 steps
Flags
1
Featured Student Guide
This guide has been the hard work of our awesome students and is found to be exceptionally cool by the iFixit staff.
BackSony DSC-RX100MA Model IV
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Back Cover
- Remove battery by sliding the tab to open the cover
Remove battery by sliding the tab to open the cover
1024
Step 2
- Using the screwdriver, remove all screws (black 2.5mm) from outermost layer of the assembly.
- All screws in the camera can be removed with the PH 0 driver head.
Using the screwdriver, remove all screws (black 2.5mm) from outermost layer of the assembly.
All screws in the camera can be removed with the PH 0 driver head.
Step 3
- Also using the screwdriver, remove screws (black 1mm) underneath articulated LCD screen.
- Remove the marked 2.5 mm screws with the screwdriver
Also using the screwdriver, remove screws (black 1mm) underneath articulated LCD screen.
Remove the marked 2.5 mm screws with the screwdriver
Step 4
- Using the plastic opening tools, carefully pry off the bottom plate.
- Do not pull too hard as you may break the plastic casing.
Using the plastic opening tools, carefully pry off the bottom plate.
Do not pull too hard as you may break the plastic casing.
Step 5
- Using the same plastic opening tools, separate the screen and back assembly from the front portion of the camera
- Once the back assembly is slightly detached, pull the media covers for the HDMI and Multimedia ports
Using the same plastic opening tools, separate the screen and back assembly from the front portion of the camera
Once the back assembly is slightly detached, pull the media covers for the HDMI and Multimedia ports
Step 6
- Remove the back cover
Remove the back cover
Step 7
Screen
- Move side panel to get access to screws
- Remove two screws (black 2.5mm) with PH #0 screwdriver
Move side panel to get access to screws
Remove two screws (black 2.5mm) with PH #0 screwdriver
Step 8
- Remove back panel assembly while still keeping ribbon cable attached
- Be very gentle and care not to tear the gold ribbon cable. This will be a common theme throughout these replacement guides.
Remove back panel assembly while still keeping ribbon cable attached
Be very gentle and care not to tear the gold ribbon cable. This will be a common theme throughout these replacement guides.
Step 9
- Carefully unplug ribbon connector to fully detach LCD screen assembly from camera
Carefully unplug ribbon connector to fully detach LCD screen assembly from camera
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 4 other contributors
KC Egger
Member since: 02/10/2017
288 Reputation
2 Guides authored
Badges:
8
+5 more badges
Team
Cal Poly, Team 21-1, Maness Winter 2017
Member of Cal Poly, Team 21-1, Maness Winter 2017
CPSU-MANESS-W17S21G1
5 Members
10 Guides authored
Alberto Lora - Jul 28, 2018
Reply
Any idea where I can get a set or replacement screws? one came out of my LCD joint and I can’t find replacements anywhere online. I’ve even tried Ebay.
Connor Quinn - Jan 10, 2021
Reply
Definately be careful with the gold ribbon cable, looked at mine funny and it just snapped in two.. waiting on a replacement now :(
Jamie Dunkley - Jan 13, 2021
Reply
I’ve ripped 2 of these before - not fun! Still… cheap enough to buy but delivery took a couple of weeks.
I had a cracked screen so had to take this out to replace as well - problem i’ve had is that although i stuck it down really well (with 3M 1mm double-sided tape, it doesn’t hold great and so the screen has risen a bit and doesn’t sit flush.
Just in the process now of sticking it down again but with a touch of superglue as i need it to hold down a bit better - that should hopefully be me done then :)
Great guide by the way KC Egger - thanks for taking the time to put this together - it’s been a life saver for me!
Ian Cullen - Jan 30, 2021
Where did you purchase your screen, I’ve been trying to find one from Sony parts dealers and can’t find it. Any links would be helpful, thanks.