Difficulty

Moderate

Steps

10

Time Required

                          10 minutes

Sections

2

  • Cover
  • 4 steps
  • Monitor
  • 6 steps

Flags

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

  • BackSony DVP-FX730

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Cover
  • Remove the five exposed 7.9 mm screws using a Phillips screwdriver.
  • Punch through the warranty sticker with the spudger.
  • Remove the screw underneath with the Phillips screwdriver.

Remove the five exposed 7.9 mm screws using a Phillips screwdriver.

Punch through the warranty sticker with the spudger.

Remove the screw underneath with the Phillips screwdriver.

1024

Step 2

  • Remove the rubber feet using the spudger.
  • Remove the screws that were covered by the rubber feet.

Remove the rubber feet using the spudger.

Remove the screws that were covered by the rubber feet.

Step 3

  • Hold on to the corners of the cover and gently lift the cover.
  • The tray is still connected to the base with wires.

Hold on to the corners of the cover and gently lift the cover.

The tray is still connected to the base with wires.

Step 4

  • Gently remove the wires with tweezers by pulling up on the base they are attached to.

Gently remove the wires with tweezers by pulling up on the base they are attached to.

Step 5

              Monitor
  • Use your hand to remove the small back cover by gently pulling upward.

Use your hand to remove the small back cover by gently pulling upward.

Step 6

  • Using a screwdriver, remove the two 12 mm pan head screws.

Using a screwdriver, remove the two 12 mm pan head screws.

Step 7

  • The screen should now detach from the primary device.
  • The wires, indicated with a blue box, will still connect the screen.

The screen should now detach from the primary device.

The wires, indicated with a blue box, will still connect the screen.

Step 8

  • Remove the wires attached to the white base using tweezers to pull them up.

Remove the wires attached to the white base using tweezers to pull them up.

Step 9

  • Referring back to Step 8, do the same with the wires attached to the black base.

Referring back to Step 8, do the same with the wires attached to the black base.

Step 10

  • The screen should now be completely separated from the main device.

The screen should now be completely separated from the main device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 8 other contributors 


                    Andrew Ward

Member since: 01/20/2012

75 Reputation

                                      2 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       Cal Poly, Team 11-21, Maness Winter 2012                        

                                                  Member of Cal Poly, Team 11-21, Maness Winter 2012 



                    CPSU-MANESS-W12S11G21                     


                                            4 Members                     


                                            5 Guides authored