Sony Dvp Sr200P Dvd Reader Replacement Repair Guide

Difficulty

Moderate

Steps

11

Time Required

                          1 hour            

Sections

4

• Top Cover
• 2 steps
• Processing Board
• 4 steps
• DVD Drive
• 2 steps
• DVD Reader
• 3 steps

Flags

3

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

Confusing Text

Some of this guide’s text is confusing, duplicated, or off-topic. Clarify it by editing!

• BackSony DVP-SR200P

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Top Cover               

• Remove the five #1 Phillips screws (black, 3/16") attaching the cover to the DVD player.
• One 3/16" screw on the right side of the DVD player.
• One 3/16" screw on the left side of the DVD player (directly opposite of other screw).
• Three 3/16" screws on the back of the DVD player.

Remove the five #1 Phillips screws (black, 3/16") attaching the cover to the DVD player.

One 3/16" screw on the right side of the DVD player.

One 3/16" screw on the left side of the DVD player (directly opposite of other screw).

Three 3/16" screws on the back of the DVD player.

1024

Step 2

• Slide the cover away from the front of the DVD player until it is off.

Slide the cover away from the front of the DVD player until it is off.

Step 3

              Processing Board               

• Remove the blue tape from the processing board by gently pulling upward.

Remove the blue tape from the processing board by gently pulling upward.

Step 4

• Use the tweezers to remove the four sets of wires connected to the processing board. Start with the cord located in front of the row of three cords.
• The wires may be difficult to remove. Wiggling them while lifting them up may help remove them.

Use the tweezers to remove the four sets of wires connected to the processing board. Start with the cord located in front of the row of three cords.

The wires may be difficult to remove. Wiggling them while lifting them up may help remove them.

Step 5

• Handle the processing board with care. It is fragile.
• Unscrew the two #1 Phillips screws (silver, 3/16") located on the two edge corners of the processing board.

Handle the processing board with care. It is fragile.

Unscrew the two #1 Phillips screws (silver, 3/16") located on the two edge corners of the processing board.

Step 6

• Orient the DVD player so that you are facing the video and audio jacks.
• Unscrew the two #1 Phillips screws (silver, 3/16") located on the outside of the DVD player
• The processing board is now free to be removed and replaced.

Orient the DVD player so that you are facing the video and audio jacks.

Unscrew the two #1 Phillips screws (silver, 3/16") located on the outside of the DVD player

The processing board is now free to be removed and replaced.

Step 7

              DVD Drive               

• Orient the DVD player so the front of the DVD player is opposite of you.
• Remove the two #1 Phillips screws (silver, 3/16") that attach the DVD drive to the bottom of the DVD player.

Orient the DVD player so the front of the DVD player is opposite of you.

Remove the two #1 Phillips screws (silver, 3/16") that attach the DVD drive to the bottom of the DVD player.

Step 8

• Remove the DVD drive by pulling it backward and upward while ensuring that it is free of any braces.

Remove the DVD drive by pulling it backward and upward while ensuring that it is free of any braces.

Step 9

              DVD Reader               

• Flip the DVD drive upside down, to match the orientation of the first picture.
• Carefully remove the white ribbon cable from the brace holding it in place by sliding it out towards you.
• Next remove the brace from the DVD drive. Carefully wiggle and pull the brace upward as the white ribbon cable slides out through the brace.

Flip the DVD drive upside down, to match the orientation of the first picture.

Carefully remove the white ribbon cable from the brace holding it in place by sliding it out towards you.

Next remove the brace from the DVD drive. Carefully wiggle and pull the brace upward as the white ribbon cable slides out through the brace.

Step 10

• Remove the four silver #1 Phillips 3/16’‘screws to free the DVD reader from the DVD drive.

Remove the four silver #1 Phillips 3/16’‘screws to free the DVD reader from the DVD drive.

Step 11

• Remove the DVD reader from the DVD drive by pulling it upwards off of the drive.
• The DVD reader can now be replaced.

Remove the DVD reader from the DVD drive by pulling it upwards off of the drive.

The DVD reader can now be replaced.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 5 other contributors 

                    Jose Coronel                     

Member since: 01/11/2013

66 Reputation

                                      1 Guide authored                  



                       Badges:
                       6







                                                        +3 more badges                           

Team

                       Cal Poly, Team 5-17, Forte Winter 2013                        

                                                  Member of Cal Poly, Team 5-17, Forte Winter 2013 



                    CPSU-FORTE-W13S5G17                     


                                            5 Members                     


                                            6 Guides authored                     

WWE Final Fighters - Jun 2, 2017

Reply

Which part help to play games in dvd player