Difficulty
Moderate
Steps
10
Time Required
20 minutes
Sections
4
- Battery Cover
- 1 step
- Back Casing
- 3 steps
- Keypad
- 3 steps
- LCD Screen
- 3 steps
Flags
3
Needs Better Images
Better photos will improve this guide. Help out by taking, editing, or uploading new ones!
Action Shots
Be an action hero! This guide needs images that better demonstrate how to perform specific actions.
Better Introduction
Improve this guide by completing or revising its introduction.
BackSony Ericsson K750i
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Battery Cover
- Remove the battery cover.
- Press down firmly with your thumb and slide the cover back.
Remove the battery cover.
Press down firmly with your thumb and slide the cover back.
1024
Step 2
Back Casing
- Remove two Phillips #0 screws from the battery chamber.
- Remove two Torx T6 screws from the battery chamber.
Remove two Phillips #0 screws from the battery chamber.
Remove two Torx T6 screws from the battery chamber.
Step 3
- Gently pry off the back casing.
- Work an opening tool around the entire seam before attempting to pull off the casing. This action will reduce the chance of cracking the casing.
Gently pry off the back casing.
Work an opening tool around the entire seam before attempting to pull off the casing. This action will reduce the chance of cracking the casing.
Step 4
- Remove the casing to expose the camera’s components.
Remove the casing to expose the camera’s components.
Step 5
Keypad
- Gently pry open the front casing by working an opening tool along the entire seam.
Gently pry open the front casing by working an opening tool along the entire seam.
Step 6
- Remove the front casing by gently lifting it from the phone.
- Be careful not to pull off any other delicate pieces.
Remove the front casing by gently lifting it from the phone.
Be careful not to pull off any other delicate pieces.
Step 7
- Remove the keypad.
- The LCD screen is very fragile. Be careful not to catch the keypad on it while removing.
Remove the keypad.
The LCD screen is very fragile. Be careful not to catch the keypad on it while removing.
Step 8
LCD Screen
- Remove the screws holding the screen in place.
Remove the screws holding the screen in place.
Step 9
- Gently lift the base of the keypad to remove it.
Gently lift the base of the keypad to remove it.
Step 10
- Gently pull up the green film, avoiding the joystick.
- The LCD screen will be attached to this film and come off with it.
Gently pull up the green film, avoiding the joystick.
The LCD screen will be attached to this film and come off with it.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 4 other contributors
Abby Evers
Member since: 10/04/2011
202 Reputation
6 Guides authored
Badges:
12
+9 more badges
Team
UW Stout, Team 1-6, Zhou Fall 2011
Member of UW Stout, Team 1-6, Zhou Fall 2011
UWSTOUT-ZHOU-F11S1G6
4 Members
12 Guides authored
Aurelien - Aug 26, 2014
Reply
Works perfectly, thank you guys!