Difficulty
Easy
Steps
5
Time Required
2 - 5 minutes
Sections
2
- Faceplate
- 2 steps
- Camera Lens
- 3 steps
Flags
1
Needs Better Images
Better photos will improve this guide. Help out by taking, editing, or uploading new ones!
BackSony Ericsson W518a
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Faceplate
- Find the small notch on the side of the phone. The notch is located by the “fast-forward” button and the “lock” switch.
Find the small notch on the side of the phone. The notch is located by the “fast-forward” button and the “lock” switch.
1024
Step 2
- Insert your plastic opening tool into the notch.
- Pry off the faceplate by gently sliding the plastic opening tool around the phone while still keeping the tool under the edge of the phone.
- When enough of the faceplate has been lifted it can be easily removed.
- In order to replace the faceplate, simply press and snap the faceplate back onto the front of the phone.
Insert your plastic opening tool into the notch.
Pry off the faceplate by gently sliding the plastic opening tool around the phone while still keeping the tool under the edge of the phone.
When enough of the faceplate has been lifted it can be easily removed.
In order to replace the faceplate, simply press and snap the faceplate back onto the front of the phone.
Step 3
Camera Lens
- Remove the four 2mm Phillips screws from the back housing of the phone.
Remove the four 2mm Phillips screws from the back housing of the phone.
Step 4
- Insert the plastic opening tool in the notch at the top corner of the phone.
- Lift the corner and run the plastic opening tool around the phone until the back housing can easily be removed.
Insert the plastic opening tool in the notch at the top corner of the phone.
Lift the corner and run the plastic opening tool around the phone until the back housing can easily be removed.
Step 5
- Remove the lends by pushing the lens from the inside of the housing.
Remove the lends by pushing the lens from the inside of the housing.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 4 other contributors
kgkramer
Member since: 06/27/2012
121 Reputation
2 Guides authored
Badges:
6
+3 more badges
Team
Cal Poly, Team 1-5, Regan SU 2012
Member of Cal Poly, Team 1-5, Regan SU 2012
CPSU-REGAN-SU12S1G5
3 Members
10 Guides authored