Difficulty

Moderate

Steps

7

Time Required

                          15 - 30 minutes

Sections

3

  • Battery
  • 2 steps
  • Logic Board
  • 4 steps
  • Camera
  • 1 step

Flags

0

  • BackSony Ericsson Xperia Pro MK16A

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Taking the Back Off
  • Use a plastic opening tool to get the back cover off your phone.
  • The plastic opener will work on any side, but be careful and pry gently.

Use a plastic opening tool to get the back cover off your phone.

The plastic opener will work on any side, but be careful and pry gently.

1024

Step 2

              Removing the Battery
  • Locate the battery in your phone.
  • Find the divot below the battery.
  • Use your thumb to lift the battery out of the phone.

Locate the battery in your phone.

Find the divot below the battery.

Use your thumb to lift the battery out of the phone.

Step 3

              Remove Screws
  • Remove the 4 black screws with the Phillips screwdriver.
  • Remove the 4 silver screws with the Torx screwdriver.

Remove the 4 black screws with the Phillips screwdriver.

Remove the 4 silver screws with the Torx screwdriver.

Step 4

              Remove Back Case
  • Insert the plastic opening tool in between the two halves of the case. Pry around the phone to detach the back case.

Insert the plastic opening tool in between the two halves of the case. Pry around the phone to detach the back case.

Step 5

              Access the Logic Board
  • Remove the last screw that is connecting the logic board using the Phillips screwdriver.
  • Undo the two ribbons.

Remove the last screw that is connecting the logic board using the Phillips screwdriver.

Undo the two ribbons.

Step 6

              Remove the Logic Board
  • Undo that last connector.

Undo that last connector.

Step 7

              Remove Camera
  • Lift the camera off of its connector on the logic board.

Lift the camera off of its connector on the logic board.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 2 other contributors 


                    Sean Gallagher

Member since: 10/16/2014

66 Reputation

                                      1 Guide authored                  



                       Badges:
                       6







                                                        +3 more badges

Team

                       UMass Dartmouth, Team 6-5, Vijaybhaskar Fall 2014                        

                                                  Member of UMass Dartmouth, Team 6-5, Vijaybhaskar Fall 2014 



                    UMASSD-VIJAYBHASKAR-F14S6G5                     


                                            3 Members                     


                                            4 Guides authored

Andrea - Mar 21, 2017

Reply

Hi,

my Sony Ericsson Xperia Pro MK16i fell onto the stone floor and now the auto focus of the camera does not work anymore. It takes photos, but they are mostly blurred. Do you know if changing the camera part would fix this problem or is the auto focus function set in some other part than the camera itself? Thank you.