Difficulty
Moderate
Steps
8
Time Required
Suggest a time??
Sections
2
- Logic Board
- 4 steps
- LCD Display
- 4 steps
Flags
1
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackSony Ericsson Xperia X10
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
Please SUBSCRIBE to my channel ツ
What you need
Video Overview
Step 1
Logic Board
- Switch-off the phone.
- Remove the battery.
- Unscrew 8x T6 Torx screws.
Switch-off the phone.
Remove the battery.
Unscrew 8x T6 Torx screws.
1024
Step 2
- Use a Plastic Pry or other plastic tool to unhook the back housing / bezel and remove it.
- Tip - try prying it open from the top and over to the side. It can be very tight if you are doing this for the first time. The volume rocker and camera button are not part of the housing, so try going around it.
Use a Plastic Pry or other plastic tool to unhook the back housing / bezel and remove it.
Tip - try prying it open from the top and over to the side. It can be very tight if you are doing this for the first time. The volume rocker and camera button are not part of the housing, so try going around it.
Step 3
- Remove the Volume Up/Down and Camera buttons.
- Unhook the SIM & SD Card reader unit and disconnect the flex cable.
Remove the Volume Up/Down and Camera buttons.
Unhook the SIM & SD Card reader unit and disconnect the flex cable.
Step 4
- Remove the Audio jack connector.
- Disconnect 4x flex cables:
- LCD Display
- Menu buttons
- Touchscreen
- Earpiece, Volume & Power On buttons
- Carefully remove the mother board.
- Please SUBSCRIBE to my channel ツ
Remove the Audio jack connector.
Disconnect 4x flex cables:
LCD Display
Menu buttons
Touchscreen
Earpiece, Volume & Power On buttons
Carefully remove the mother board.
Step 5
LCD Display
- Unstuck the Touchscreen flex cable from the LCD Display Frame.
- Use only plastic tools for this operation to avoid damage to the cable.
- You can use hot air to make the separation easier.
- Disassemble the Home buttons flex cable & Plastic Bracket to release the Touchscreen Flex cable.
Unstuck the Touchscreen flex cable from the LCD Display Frame.
Use only plastic tools for this operation to avoid damage to the cable.
You can use hot air to make the separation easier.
Disassemble the Home buttons flex cable & Plastic Bracket to release the Touchscreen Flex cable.
Step 6
- Use a Plastic Pry or other plastic tool to separate the LCD Display with Frame from the Front Touchscreen Housing.
- Do this carefully.
Use a Plastic Pry or other plastic tool to separate the LCD Display with Frame from the Front Touchscreen Housing.
Do this carefully.
Step 7
- Remove the Menu / Camera buttons flex cable.
- Use again hot air and carefully unstick the LCD Display flex cable from the frame.
Remove the Menu / Camera buttons flex cable.
Use again hot air and carefully unstick the LCD Display flex cable from the frame.
Step 8
- Separate the LCD Display from the Metal Frame.
- Please SUBSCRIBE to my channel ツ
Separate the LCD Display from the Metal Frame.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 1 other contributor
ZFix
Member since: 12/09/2013
187,195 Reputation
330 Guides authored
Badges:
35
+32 more badges
Team
Master Techs
Member of Master Techs
Community
310 Members
1,168 Guides authored
