Sony Handycam Dcr Sr 47 Lcd Screen Replacement Repair Guide

Difficulty

Moderate

Steps

11

Time Required

Suggest a time??

Sections

2

• Hard DRive
• 5 steps
• LCD Screen
• 6 steps

Flags

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

Bullets!

Better coordination with markups and the color/type of bullets will help make this guide more clear!

• BackSony Handycam DCR-SR 47

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Hard DRive               

• Remove the battery.
• Use Philips #000 screwdriver to remove the 3mm screw under the battery
• *It is recommended that you wait One Hour after removing the battery before disassembling the rest of the camera

Remove the battery.

Use Philips #000 screwdriver to remove the 3mm screw under the battery

*It is recommended that you wait One Hour after removing the battery before disassembling the rest of the camera

1024

Step 2

• Using the Phillips #000 screwdriver, remove all 6 of the 3mm screws located on the side of the camera.
• This step seems unnecessary to initially find the Hard Drive, but will allow access to the attached flex cable

Using the Phillips #000 screwdriver, remove all 6 of the 3mm screws located on the side of the camera.

This step seems unnecessary to initially find the Hard Drive, but will allow access to the attached flex cable

Step 3

• Using the Phillips #000 tool, remove the three 3mm screws from under the LCD screen

Using the Phillips #000 tool, remove the three 3mm screws from under the LCD screen

Step 4

• Using the Phillips #000 screwdriver, remove the one 3mm screw on the back of the camera
• Pull away the back shell of the camera, exposing the hard drive.

Using the Phillips #000 screwdriver, remove the one 3mm screw on the back of the camera

Pull away the back shell of the camera, exposing the hard drive.

Step 5

• Gently pull the flex cable away from the hard drive. It should pop-off with minimal effort.
• The black guard has been removed in the first picture. The guard does not need to be removed in order to reach hard drive and cable, but it does show the path that the cable takes
• Once removing the flex cable, remove the plastic guard from the side of the hard drive.

Gently pull the flex cable away from the hard drive. It should pop-off with minimal effort.

The black guard has been removed in the first picture. The guard does not need to be removed in order to reach hard drive and cable, but it does show the path that the cable takes

Once removing the flex cable, remove the plastic guard from the side of the hard drive.

Step 6

              LCD Screen               

• Insert wisdom here.

Insert wisdom here.

Step 7

Step 8

• Using the plastic opening tool, separate the LCD screen from its plastic housing

Using the plastic opening tool, separate the LCD screen from its plastic housing

Step 9

• Using the spudger, or by gently pulling, remove the smaller end of the flex cable from the LCD Screen

Using the spudger, or by gently pulling, remove the smaller end of the flex cable from the LCD Screen

Step 10

• Using the Phillips #000 Screwdriver, remove the one 3mm screw from the LCD Scren
• The LCD screen may now be removed from the camera completely.

Using the Phillips #000 Screwdriver, remove the one 3mm screw from the LCD Scren

The LCD screen may now be removed from the camera completely.

Step 11

• Take the LCD screen away from the housing and replace with new screen

Take the LCD screen away from the housing and replace with new screen

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 1 other contributor 

                    Ragan Whitlock                     

Member since: 08/26/2015

532 Reputation

                                      4 Guides authored                  



                       Badges:
                       13







                                                        +10 more badges                           

Team

                       Western Carolina University, Team 1-2, Virtue Fall 2015                        

                                                  Member of Western Carolina University, Team 1-2, Virtue Fall 2015 



                    WCU-VIRTUE-F15S1G2                     


                                            4 Members                     


                                            8 Guides authored                     

Triforce Studios - Feb 7, 2017

Reply

where can i buy a screen for this camera?