Difficulty
Moderate
Steps
5
Time Required
15 minutes
Sections
2
- Battery
- 2 steps
- Camera’s Body
- 3 steps
Flags
0
BackSony Handycam HDR-CX220
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Push in the battery indicator.
Push in the battery indicator.
1024
Step 2
- Slide the battery out of the slot.
- To put the battery back in, line up the battery’s metal part with the camera’s and slide it in.
Slide the battery out of the slot.
To put the battery back in, line up the battery’s metal part with the camera’s and slide it in.
Step 3
Camera's Body
- Use the Phillips #0 screwdriver to remove the two 5mm screws.
- Use the Phillips #0 screwdriver to remove the two 5mm screws.
- Use the Phillips #0 screwdriver to remove the three 5mm screws.
Use the Phillips #0 screwdriver to remove the two 5mm screws.
Use the Phillips #0 screwdriver to remove the three 5mm screws.
Step 4
- Use the plastic opening tool to loosen the plastic case of the camcorder.
Use the plastic opening tool to loosen the plastic case of the camcorder.
Step 5
- Use your hands to remove the plastic case.
- Gently pull on the case not to damage anything internally.
Use your hands to remove the plastic case.
Gently pull on the case not to damage anything internally.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
Keven
Member since: 03/11/2016
811 Reputation
6 Guides authored
Badges:
11
+8 more badges
Team
UMass Dartmouth, Team 8-5, Botvin Spring 2016
Member of UMass Dartmouth, Team 8-5, Botvin Spring 2016
UMASSD-BOTVIN-S16S8G5
3 Members
12 Guides authored
