Sony Hdr As30V Outer Casing Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          15 minutes

Sections

Outer Casing
5 steps

Flags

BackSony HDR-AS30V
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Outer Casing

Power off the device. Remove the component jack cover.
Open component door.
Using the Phillips 00 screwdriver, remove the two screws holding the jack cover in place.

Power off the device. Remove the component jack cover.

Open component door.

Using the Phillips 00 screwdriver, remove the two screws holding the jack cover in place.

1024

Step 2

Open the battery door.
Slide the battery cap along the length of the camera, then flip the cap outward. Use caution; there may be internal damage affecting the functionality of the sliding mechanism.

Open the battery door.

Slide the battery cap along the length of the camera, then flip the cap outward. Use caution; there may be internal damage affecting the functionality of the sliding mechanism.

Step 3

Prepare to remove outer casing.
Using the 2.5 mm precision slotted screwdriver, insert the tip of the screwdriver under the holder to wedge. Use caution when preparing to wedge apart fragile components.

Prepare to remove outer casing.

Using the 2.5 mm precision slotted screwdriver, insert the tip of the screwdriver under the holder to wedge. Use caution when preparing to wedge apart fragile components.

Step 4

Separate Casing from Device.
With the screwdriver wedged, apply slight force while pulling the casing away from the device. Use caution to avoid causing damage to fragile parts.

Separate Casing from Device.

With the screwdriver wedged, apply slight force while pulling the casing away from the device. Use caution to avoid causing damage to fragile parts.

Step 5

With the outer casing pulled away from the device, take note of the orientation of the inner component to avoid an electrical short.
Once the orientation of the inner component is noted, slide the inner component out of the casing. You may now replace the broken casing with a new one.

With the outer casing pulled away from the device, take note of the orientation of the inner component to avoid an electrical short.

Once the orientation of the inner component is noted, slide the inner component out of the casing. You may now replace the broken casing with a new one.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 8 other contributors

                    Patrick Finney

Member since: 01/27/2015

101 Reputation

                                      1 Guide authored                  



                       Badges:
                       4







                                                        +1 more badge

Team

                       Penn State, Team 2-12, Kaschak Winter 2015                        

                                                  Member of Penn State, Team 2-12, Kaschak Winter 2015 



                    PSU-KASCHAK-W15S2G12                     


                                            4 Members                     


                                            4 Guides authored

Introduction#

What you need#

Team#

Introduction

What you need

Team