Sony Rm Lvr1 Motherboard Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          30 minutes - 1 hour

Sections

Battery
2 steps
LCD Screen
6 steps

Flags

BackSony RM-LVR1
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Battery

Use a Phillips #00 screwdriver to remove the four (4) screws on the back of the device.
If the screws strips or is previously stripped, refer to the stripped screw repair guide.

Use a Phillips #00 screwdriver to remove the four (4) screws on the back of the device.

If the screws strips or is previously stripped, refer to the stripped screw repair guide.

1024

Step 2

Battery is the rectangular and silver object in the center of device.
Remove battery with finger by prying at the rear.
If unable to remove battery, pry out using spudger.

Battery is the rectangular and silver object in the center of device.

Remove battery with finger by prying at the rear.

If unable to remove battery, pry out using spudger.

Step 3

              LCD Screen

Unscrew the 3 (three) screws holding the bracket in place.
Then remove the bracket by prying one end up.
Do not rip the ribbon cable connecting the bracket to the motherboard.

Unscrew the 3 (three) screws holding the bracket in place.

Then remove the bracket by prying one end up.

Do not rip the ribbon cable connecting the bracket to the motherboard.

Step 4

With tweezers, unplug the ribbon cable from the white connector.

With tweezers, unplug the ribbon cable from the white connector.

Step 5

Remove motherboard from the device by pulling upward gently, with fingers or tweezers.

Remove motherboard from the device by pulling upward gently, with fingers or tweezers.

Step 6

Gently push out on these two clips holding the LCD to the motherboard
Once you have the first two off, ever so carefully, push the LCD towards the remaining two clips.
There is a ribbon cable underneath the LCD connecting it to the motherboard. Avoid sharp, sudden movements to prevent it from being damged

Gently push out on these two clips holding the LCD to the motherboard

Once you have the first two off, ever so carefully, push the LCD towards the remaining two clips.

There is a ribbon cable underneath the LCD connecting it to the motherboard. Avoid sharp, sudden movements to prevent it from being damged

Step 7

Undo the ribbon cable attached between the motherboard and screen by prying up black tab which holds the cable, using spudger. (See pictures)

Undo the ribbon cable attached between the motherboard and screen by prying up black tab which holds the cable, using spudger. (See pictures)

Step 8

Remove the screen from the motherboard.

Remove the screen from the motherboard.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 3 other contributors

                    Alexander Thomas

Member since: 09/28/2017

265 Reputation

                                      2 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       Eastern Washington University, Team S2-G2, Crane Fall 2017                        

                                                  Member of Eastern Washington University, Team S2-G2, Crane Fall 2017 



                    EWU-CRANE-F17S2G2                     


                                            3 Members                     


                                            6 Guides authored

gilbert keiser - Sep 26, 2019

Hello

Thank you for your tutorial.

My question is about the rubber cap of the push button

Can it be changed? Spare part ?

Regards

Introduction#

What you need#

Team#

Introduction

What you need

Team