Sony Srs Xb40 Speaker Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          10 - 15 minutes

Sections

Speaker Assembly Replacement
7 steps
Speaker
2 steps

Flags

BackSony SRS-XB40
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Speaker Assembly Replacement

Remove the speaker case from the outer casing by prying it from the base of the speaker using a metal spudger.

Remove the speaker case from the outer casing by prying it from the base of the speaker using a metal spudger.

1024

Step 2

Remove the four T-8 screws (15 mm long) from the black speaker face.

Remove the four T-8 screws (15 mm long) from the black speaker face.

Step 3

Pry the two rubber end pieces loose enough to pry off two pieces of the long plastic casing from the speaker body using a metal spudger.

Pry the two rubber end pieces loose enough to pry off two pieces of the long plastic casing from the speaker body using a metal spudger.

Step 4

Pry the two remaining rubber pieces of the casing completely away from the body of the speaker with the same metal pry tool.

Pry the two remaining rubber pieces of the casing completely away from the body of the speaker with the same metal pry tool.

Step 5

Once you have removed the outer blue casing, four T-8 screws (15 mm long) will be revealed on each corner. After removing these screws, simply pull the top part of the speaker way from the body to get the the inner part of the speaker.

Once you have removed the outer blue casing, four T-8 screws (15 mm long) will be revealed on each corner. After removing these screws, simply pull the top part of the speaker way from the body to get the the inner part of the speaker.

Step 6

Once you have gotten to the internal parts of the speaker, there are seven wires connecting the speaker plate to the body of the speaker. Pinch the release tabs at the top of each of the four main wires to remove them.

Once you have gotten to the internal parts of the speaker, there are seven wires connecting the speaker plate to the body of the speaker. Pinch the release tabs at the top of each of the four main wires to remove them.

Step 7

Simply pull the thin wires on each side to remove them from their attachment points.
Remove the final red and black wire by gently pulling it apart.
This will ultimately detach the speaker plate from the base.

Simply pull the thin wires on each side to remove them from their attachment points.

Remove the final red and black wire by gently pulling it apart.

This will ultimately detach the speaker plate from the base.

Step 8

              Speaker

After you have gotten the speaker plate off of the main body of the speaker, there will be two PH1 10mm screws that hold on the speaker.
Using the screwdriver and PH1 head from your toolkit, unscrew the 2 screws and place them to the side.

After you have gotten the speaker plate off of the main body of the speaker, there will be two PH1 10mm screws that hold on the speaker.

Using the screwdriver and PH1 head from your toolkit, unscrew the 2 screws and place them to the side.

Step 9

Now your speaker is free from the speaker plate and you can replace the broken or faulty one with a new one.
Your speaker replacement is now done.

Now your speaker is free from the speaker plate and you can replace the broken or faulty one with a new one.

Your speaker replacement is now done.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors

                    Zack Coker

Member since: 01/29/2018

379 Reputation

                                      2 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges

Team

                       University of Alabama, Team S1-G1, Bedsole Spring 2018                        

                                                  Member of University of Alabama, Team S1-G1, Bedsole Spring 2018 



                    UA-BEDSOLE-S18S1G1                     


                                            4 Members                     


                                            6 Guides authored

Evan Mocke - Oct 21, 2018

Where can i purchase a replacement speaker?

Elijah allen - Mar 14, 2019

Where do I get the replacement speaker?

Akronix Electronics - Sep 2, 2019

https://www.olx.ua/obyavlenie/odin-dinam…

this store in ukraine

Lilee Foster - May 17, 2020

I broke my speaker case. It’s the black, plastic protective case that is in front of the speaker. Where can i get a new replacement part?

Introduction#

What you need#

Team#

Introduction

What you need

Team