Difficulty
Moderate
Steps
4
Time Required
Suggest a time??
Sections
1
- Faceplate
- 4 steps
Flags
2
Better Introduction
Improve this guide by completing or revising its introduction.
Missing Details
Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.
BackSony SRS-XB43
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Faceplate
- Insert the metal spudger into the mesh’s seam/opening located at the bottom of the speaker.
- Begin applying pressure, prying along the run of the seam until the mesh cover begins to come loose.
- Fully open the hinged mesh cover and pry it off the unit.
Insert the metal spudger into the mesh’s seam/opening located at the bottom of the speaker.
Begin applying pressure, prying along the run of the seam until the mesh cover begins to come loose.
Fully open the hinged mesh cover and pry it off the unit.
1024
Step 2
- Turn the speaker so the back is facing you.
- Remove the factory tamper seal below the speaker volume toggle to reveal a single screw.
- Remove the single screw using a T8 Torx.
Turn the speaker so the back is facing you.
Remove the factory tamper seal below the speaker volume toggle to reveal a single screw.
Remove the single screw using a T8 Torx.
Step 3
- Remove all ten screws using a Phillips #1 screwdriver.
Remove all ten screws using a Phillips #1 screwdriver.
Step 4
- Slowly lift the speaker face off of the housing unit.
- Unplug the six wires connecting the faceplate to the motherboard.
Slowly lift the speaker face off of the housing unit.
Unplug the six wires connecting the faceplate to the motherboard.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
Kristen Gismondi
Member since: 11/12/2014
69,397 Reputation
176 Guides authored
Badges:
44
+41 more badges
Team
iFixit
Member of iFixit
Community
141 Members
15,772 Guides authored