Difficulty

Easy

Steps

6

Time Required

                          15 - 20 minutes

Sections

2

  • Battery Replacement
  • 4 steps
  • RAM Replacement
  • 2 steps

Flags

0

  • BackSony Vaio Fit SVF14A190X

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery Replacement
  • Make sure the battery is drained or the computer is turned off.
  • Use the Phillips head screw driver to remove the eleven 6 mm screws.
  • Use the Phillips head screw driver to remove the one 4 mm screw securing the CD drive.

Make sure the battery is drained or the computer is turned off.

Use the Phillips head screw driver to remove the eleven 6 mm screws.

Use the Phillips head screw driver to remove the one 4 mm screw securing the CD drive.

1024

Step 2

  • Insert the plastic opening tool into the slit of the CD drive.
  • Then pull it outwards.
  • Grab the CD drive with your hand.
  • Take the CD drive all the way out.

Insert the plastic opening tool into the slit of the CD drive.

Then pull it outwards.

Grab the CD drive with your hand.

Take the CD drive all the way out.

Step 3

  • Insert the plastic opening tool into the slit between the back cover and the rest of the computer.
  • Move the plastic opening tool around all sides of the device.
  • Peel off the back cover.

Insert the plastic opening tool into the slit between the back cover and the rest of the computer.

Move the plastic opening tool around all sides of the device.

Peel off the back cover.

Step 4

  • Use the Phillips head screw driver to remove the four 7 mm screws.
  • Lift the battery out with your hand.

Use the Phillips head screw driver to remove the four 7 mm screws.

Lift the battery out with your hand.

Step 5

              RAM Replacement
  • The RAM is a small rectangular component located on the opposite side of the lab top from where you pulled out the CD disc drive.

The RAM is a small rectangular component located on the opposite side of the lab top from where you pulled out the CD disc drive.

Step 6

  • Push down on the metal prongs encircled to allow the RAM component to spring up diagonally from the lab top.
  • When the RAM is sprung up, pull it out in the same direction it is currently at, to remove it from the lab top.

Push down on the metal prongs encircled to allow the RAM component to spring up diagonally from the lab top.

When the RAM is sprung up, pull it out in the same direction it is currently at, to remove it from the lab top.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 3 other contributors 


                    Bryan J. Hartman

Member since: 02/13/2018

255 Reputation

                                      2 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges

Team

                       USF Tampa, Team S11-G3, Cheng Spring 2018                        

                                                  Member of USF Tampa, Team S11-G3, Cheng Spring 2018 



                    USFT-CHENG-S18S11G3                     


                                            4 Members                     


                                            11 Guides authored