Difficulty
Moderate
Steps
5
Time Required
4 minutes
Sections
1
- Hard Drive
- 5 steps
Flags
0
BackSony Vaio PCG-41216L
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Hard Drive
- Flip the laptop over to begin the process.
- Make sure the laptop is turned off and unplugged from the power cable.
Flip the laptop over to begin the process.
Make sure the laptop is turned off and unplugged from the power cable.
1024
Step 2
- Remove the two 7mm Phillips #1 screws holding the battery cover.
Remove the two 7mm Phillips #1 screws holding the battery cover.
Step 3
- Peel off the ribbon cable, starting at the top by the wifi card.
Peel off the ribbon cable, starting at the top by the wifi card.
Step 4
- Remove all of the 7mm Phillips #1 casing screws around the hard drive.
Remove all of the 7mm Phillips #1 casing screws around the hard drive.
Step 5
- Pull the hard drive out, then remove the 3mm Phillips screws that connect the hard drive to the casing.
Pull the hard drive out, then remove the 3mm Phillips screws that connect the hard drive to the casing.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
john nunnelee
Member since: 01/10/2019
174 Reputation
1 Guide authored
Badges:
4
+1 more badge
Team
Oregon Institute of Technology, Team S1-G4, Lancaster Winter 2019
Member of Oregon Institute of Technology, Team S1-G4, Lancaster Winter 2019
OIT-LANCASTER-W19S1G4
3 Members
10 Guides authored
