Difficulty
Moderate
Steps
9
Time Required
35 minutes
Sections
1
- LCD Screen
- 9 steps
Flags
0
BackSony Vaio SVE15112FXS
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
LCD Screen
- Power laptop off before beginning.
- Turn the laptop over so that it is positioned top down with the model number facing you.
Power laptop off before beginning.
Turn the laptop over so that it is positioned top down with the model number facing you.
1024
Step 2
- Slide the “lock” tab upward to unlock the battery before removal.
- While pushing the “release” tab upward, lift the battery and pull outward to remove it from the laptop.
Slide the “lock” tab upward to unlock the battery before removal.
While pushing the “release” tab upward, lift the battery and pull outward to remove it from the laptop.
Step 3
- Turn the computer back over and open the lid.
- Remove the four rubber screw covers at each corner of the screen to expose the bezel screws
Turn the computer back over and open the lid.
Remove the four rubber screw covers at each corner of the screen to expose the bezel screws
Step 4
- Use a #0 Phillips screwdriver to remove the four 4.0 mm screen bezel screws in each corner.
Use a #0 Phillips screwdriver to remove the four 4.0 mm screen bezel screws in each corner.
Step 5
- Insert a plastic opening tool between the bezel and laptop lid. Work it around the edge to loosen the bezel.
- Lift the bezel outward to remove it and expose the screen.
- Take care when using the spudger near the hinges to avoid breaking the bezel.
Insert a plastic opening tool between the bezel and laptop lid. Work it around the edge to loosen the bezel.
Lift the bezel outward to remove it and expose the screen.
Take care when using the spudger near the hinges to avoid breaking the bezel.
Step 6
- Use a #0 Phillips screwdriver to remove the four 3.0 mm screen screws.
- Cover the keyboard with a cloth or towel to protect the screen and keep any broken glass out of the keyboard.
Use a #0 Phillips screwdriver to remove the four 3.0 mm screen screws.
Cover the keyboard with a cloth or towel to protect the screen and keep any broken glass out of the keyboard.
Step 7
- Pull the screen toward you and away from the lid until a silver cable behind the screen is visible.
- Remove the silver cable from the back of the screen. It is glued at the top and the bottom.
- Do not pull the cable loose from the lid, only remove it from the back of the screen.
Pull the screen toward you and away from the lid until a silver cable behind the screen is visible.
Remove the silver cable from the back of the screen. It is glued at the top and the bottom.
Do not pull the cable loose from the lid, only remove it from the back of the screen.
Step 8
- Lift the barcode label on the back of the screen upward to loosen the screen cable connector.
- Once the connector is visible, remove it from the pins on the back of the screen.
Lift the barcode label on the back of the screen upward to loosen the screen cable connector.
Once the connector is visible, remove it from the pins on the back of the screen.
Step 9
- Lift the screen toward you to remove it completely from the lid.
Lift the screen toward you to remove it completely from the lid.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 2 other contributors
Ashley Bierman
Member since: 09/06/2018
1,169 Reputation
5 Guides authored
Badges:
11
+8 more badges
Team
Ohio State, Team S1-G1, Whitney Fall 2018
Member of Ohio State, Team S1-G1, Whitney Fall 2018
OSU-WHITNEY-F18S1G1
2 Members
5 Guides authored
