Difficulty
Moderate
Steps
20
Time Required
Suggest a time??
Sections
3
- Battery
- 5 steps
- Hard Disk Drive
- 5 steps
- Speakers
- 10 steps
Flags
1
Missing Details
Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.
BackSony Vaio SVE151G11L
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Turn the laptop over so its underside is facing upwards and visible.
Turn the laptop over so its underside is facing upwards and visible.
1024
Step 2
- Standing so that the barcode and warning labels are upright and legible, push the left tab up and away from yourself.
Standing so that the barcode and warning labels are upright and legible, push the left tab up and away from yourself.
Step 3
- Standing so that the barcode and warning labels are upright and legible, push the right tab up and away from yourself.
Standing so that the barcode and warning labels are upright and legible, push the right tab up and away from yourself.
Step 4
- Locate the small gap where the battery and the laptop shell meet. Lift from the gap and rotate the battery up and away from yourself.
Locate the small gap where the battery and the laptop shell meet. Lift from the gap and rotate the battery up and away from yourself.
Step 5
- Pull battery away from laptop.
Pull battery away from laptop.
Step 6
Hard Disk Drive
- Flip laptop over so the bottom is facing upwards.
Flip laptop over so the bottom is facing upwards.
Step 7
- Remove 2 bottom screws in the top right on the HDD cover, with a size P000 screwdriver.
Remove 2 bottom screws in the top right on the HDD cover, with a size P000 screwdriver.
Step 8
- Pop open the cover to the HDD.
Pop open the cover to the HDD.
Step 9
- Remove the screws on the HDD with a Phillips #000 screwdriver.
Remove the screws on the HDD with a Phillips #000 screwdriver.
Step 10
- Pull plastic tab away from the laptop.
- Lift HDD away from laptop.
Pull plastic tab away from the laptop.
Lift HDD away from laptop.
Step 11
Speakers
- Remove the back cover.
Remove the back cover.
Step 12
- Remove 4 hinge screws with a Phillips #0 screwdriver.
Remove 4 hinge screws with a Phillips #0 screwdriver.
Step 13
- Pop open hinge.
- Remove black screw size P000.
Pop open hinge.
Remove black screw size P000.
Step 14
- Remove wiring along its guide.
Remove wiring along its guide.
Step 15
- Remove two hinge screws size P00.
- Pop open hinge.
Remove two hinge screws size P00.
Step 16
- Remove black screw.
Remove black screw.
Step 17
- Remove secondary black screw.
Remove secondary black screw.
Step 18
- Remove speaker.
Remove speaker.
Step 19
- Follow wire down its wire channel and remove it from the channel.
- Pull up on the connector to disconnect the speakers to the motherboard.
Follow wire down its wire channel and remove it from the channel.
Pull up on the connector to disconnect the speakers to the motherboard.
Step 20
- Remove speaker and wire from the laptop.
Remove speaker and wire from the laptop.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 2 other contributors
Alex Theg
Member since: 10/15/2018
719 Reputation
4 Guides authored
Badges:
7
+4 more badges
Team
UMass Dartmouth, Team S9-G9, Valliere Fall 2018
Member of UMass Dartmouth, Team S9-G9, Valliere Fall 2018
UMASSD-VALLIERE-F18S9G9
4 Members
6 Guides authored
