Difficulty

Easy

Steps

9

Time Required

                          10 - 20 minutes

Sections

2

  • Battery
  • 3 steps
  • Screen
  • 6 steps

Flags

1

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

  • BackSony Vaio VGN-SR140E

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Turn the laptop over and orient it as shown in the figure.

Turn the laptop over and orient it as shown in the figure.

1024

Step 2

  • Slide the lock latch to the right to release the battery lock.
  • Slide and hold the release latch to the left.

Slide the lock latch to the right to release the battery lock.

Slide and hold the release latch to the left.

Step 3

  • Use a fingernail or plastic opening tool lift the battery while holding the release latch.Rotate the battery up and away from you to remove it from the laptop.

Use a fingernail or plastic opening tool lift the battery while holding the release latch.Rotate the battery up and away from you to remove it from the laptop.

Step 4

              Screen
  • Remove the rubber pads at all four corners of the screen bezel using a spudger. This will reveal four 5mm Phillips screws.
  • Use a Phillips #1 screwdriver to remove the four screws and set them aside.

Remove the rubber pads at all four corners of the screen bezel using a spudger. This will reveal four 5mm Phillips screws.

Use a Phillips #1 screwdriver to remove the four screws and set them aside.

Step 5

  • Remove the screen’s plastic bezel. You may need to use slight pressure to release the clips that secure the bezel to the laptop.

Remove the screen’s plastic bezel. You may need to use slight pressure to release the clips that secure the bezel to the laptop.

Step 6

  • Lift screen bezel up and off of the laptop.

Lift screen bezel up and off of the laptop.

Step 7

  • Close the laptop carefully and slowly while holding the screen with your thumb to prevent it from falling.
  • Lay the screen gently on the keyboard. This will reveal the screen’s connector.

Close the laptop carefully and slowly while holding the screen with your thumb to prevent it from falling.

Lay the screen gently on the keyboard. This will reveal the screen’s connector.

Step 8

  • Grasp the connector and gently pull it out.

Grasp the connector and gently pull it out.

Step 9

  • The screen can now be removed.

The screen can now be removed.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 


                    Jeremy

Member since: 03/18/2015

710 Reputation

                                      4 Guides authored                  



                       Badges:
                       15







                                                        +12 more badges

Team

                       Michigan Tech, Team 1-6, Lauer Spring 2015                        

                                                  Member of Michigan Tech, Team 1-6, Lauer Spring 2015 



                    MTU-LAUER-S15S1G6                     


                                            2 Members                     


                                            10 Guides authored