Difficulty

Easy

Steps

8

Time Required

                          5 minutes

Sections

1

  • LCD Screen
  • 8 steps

Flags

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

  • BackSony Vaio VPC-CW17FX

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              LCD Screen
  • Turn the laptop over and orient it as shown.

Turn the laptop over and orient it as shown.

1024

Step 2

  • Slide both latches towards the center of the battery to release.

Slide both latches towards the center of the battery to release.

Step 3

  • Use your fingernail or a plastic tool to lift the battery. Rotate the battery up and away to remove from the laptop.

Use your fingernail or a plastic tool to lift the battery. Rotate the battery up and away to remove from the laptop.

Step 4

  • Remove the rubber pads on all four corners of the screen bezel using the spudger.
  • Remove the four screws (Length: 7.7 mm) using the Phillips #0 screwdriver.

Remove the rubber pads on all four corners of the screen bezel using the spudger.

Remove the four screws (Length: 7.7 mm) using the Phillips #0 screwdriver.

Step 5

  • Remove the screen’s plastic bezel.
  • You need to use slight pressure to release the clips.

Remove the screen’s plastic bezel.

You need to use slight pressure to release the clips.

Step 6

  • Remove all four screws (Length: 7.7 mm) using a Phillips #0 screwdriver. Make sure to hold the screen while removing the screws so it doesn’t fall.
  • Using your thumb, carefully lower the glass and place it on the keyboard.
  • Do this slowly to avoid damaging the screen.

Remove all four screws (Length: 7.7 mm) using a Phillips #0 screwdriver. Make sure to hold the screen while removing the screws so it doesn’t fall.

Using your thumb, carefully lower the glass and place it on the keyboard.

Do this slowly to avoid damaging the screen.

Step 7

  • Pull off the tape and disconnect the display cable connector by gently sliding up to remove it from its socket.

Pull off the tape and disconnect the display cable connector by gently sliding up to remove it from its socket.

Step 8

  • The screen can now be removed.

The screen can now be removed.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 5 other contributors 


                    Seowon Song

Member since: 03/20/2017

113 Reputation

                                      1 Guide authored                  



                       Badges:
                       6







                                                        +3 more badges

Team

                       Texas Tech, Team S8-G5, Bennett Spring 2017                        

                                                  Member of Texas Tech, Team S8-G5, Bennett Spring 2017 



                    TTU-BENNETT-S17S8G5                     


                                            4 Members                     


                                            10 Guides authored