Difficulty
Easy
Steps
4
Time Required
5 - 7 minutes
Sections
1
- Battery
- 4 steps
Flags
0
BackSony Xperia L2 LTE
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Before disassembling the battery, power off your Sony Xperia L2 LTE.
- Remove SIM card tray.
Before disassembling the battery, power off your Sony Xperia L2 LTE.
Remove SIM card tray.
1024
Step 2
- Use the plastic opening tool to pry the back case of the phone off.
- The fingerprint sensor is connected to the motherboard.
- Disconnect the fingerprint sensor.
Use the plastic opening tool to pry the back case of the phone off.
The fingerprint sensor is connected to the motherboard.
Disconnect the fingerprint sensor.
Step 3
- Unscrew all 10 screws from the top and bottom portion of the phone using a T4 Torx screwdriver.
- Use the plastic opening tool to remove the unscrewed top and bottom portion of the phone.
Unscrew all 10 screws from the top and bottom portion of the phone using a T4 Torx screwdriver.
Use the plastic opening tool to remove the unscrewed top and bottom portion of the phone.
Step 4
- Disconnect the battery cable from the motherboard.
- Pry up the battery and remove it from the device.
- Battery may have adhesive that needs to be removed prior to removing the battery.
- Be careful not to jab the battery with any sharp tools. A punctured battery may leak dangerous chemicals or catch fire.
Disconnect the battery cable from the motherboard.
Pry up the battery and remove it from the device.
Battery may have adhesive that needs to be removed prior to removing the battery.
Be careful not to jab the battery with any sharp tools. A punctured battery may leak dangerous chemicals or catch fire.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 4 other contributors
Carrie Schmitt
Member since: 09/10/2018
214 Reputation
2 Guides authored
Badges:
5
+2 more badges
Team
University of Alabama, Team S2-G6, Bedsole Fall 2018
Member of University of Alabama, Team S2-G6, Bedsole Fall 2018
UA-BEDSOLE-F18S2G6
4 Members
5 Guides authored
eric jaehnig - Apr 2, 2020
Reply
I do not recommend this procedure. The battery is very flimsy, can be easily deformed, and often tightly glued down. Any slight deformation can cause it to short and explode. Would be safer to get a different phone (not Sony).