Difficulty

Moderate

Steps

7

Time Required

                          7 - 10 minutes

Sections

3

  • Battery
  • 4 steps
  • Motherboard
  • 2 steps
  • Rear Camera
  • 1 step

Flags

0

  • BackSony Xperia L2 LTE

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Before disassembling the battery, power off your Sony Xperia L2 LTE.
  • Remove SIM card tray.

Before disassembling the battery, power off your Sony Xperia L2 LTE.

Remove SIM card tray.

1024

Step 2

  • Use the plastic opening tool to pry the back case of the phone off.
  • The fingerprint sensor is connected to the motherboard.
  • Disconnect the fingerprint sensor.

Use the plastic opening tool to pry the back case of the phone off.

The fingerprint sensor is connected to the motherboard.

Disconnect the fingerprint sensor.

Step 3

  • Unscrew all 10 screws from the top and bottom portion of the phone using a T4 Torx screwdriver.
  • Use the plastic opening tool to remove the unscrewed top and bottom portion of the phone.

Unscrew all 10 screws from the top and bottom portion of the phone using a T4 Torx screwdriver.

Use the plastic opening tool to remove the unscrewed top and bottom portion of the phone.

Step 4

  • Disconnect the battery cable from the motherboard.
  • Pry up the battery and remove it from the device.
  • Battery may have adhesive that needs to be removed prior to removing the battery.
  • Be careful not to jab the battery with any sharp tools. A punctured battery may leak dangerous chemicals or catch fire.

Disconnect the battery cable from the motherboard.

Pry up the battery and remove it from the device.

Battery may have adhesive that needs to be removed prior to removing the battery.

Be careful not to jab the battery with any sharp tools. A punctured battery may leak dangerous chemicals or catch fire.

Step 5

              Motherboard
  • Unclip circuit connectors from phone to motherboard.

Unclip circuit connectors from phone to motherboard.

Step 6

  • Use blue plastic opening tool to pry off the motherboard.

Use blue plastic opening tool to pry off the motherboard.

Step 7

              Rear Camera
  • Detach the rear camera from motherboard and remove it from the device.

Detach the rear camera from motherboard and remove it from the device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 


                    Mikayla Wyatt

Member since: 09/05/2018

303 Reputation

                                      3 Guides authored                  



                       Badges:
                       5







                                                        +2 more badges

Team

                       University of Alabama, Team S2-G6, Bedsole Fall 2018                        

                                                  Member of University of Alabama, Team S2-G6, Bedsole Fall 2018 



                    UA-BEDSOLE-F18S2G6                     


                                            4 Members                     


                                            5 Guides authored