Difficulty

Moderate

Steps

8

Time Required

                          20 minutes

Sections

1

  • Speaker
  • 8 steps

Flags

0

  • BackSony Xperia Sola

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Speaker
  • Lay the phone as shown and put the camera facing up.

Lay the phone as shown and put the camera facing up.

1024

Step 2

  • Push the back cover as shown, then lift the cover off.

Push the back cover as shown, then lift the cover off.

Step 3

  • Remove the five screws as shown on the phone by using 26 Bit Kit.
  • Use a T6 screwdriver bit to remove top two screws.
  • Use a J000 screwdriver bit to remove the bottom two screws.
  • Use a T3 screwdriver bit to remove the middle screw (close to camera).

Remove the five screws as shown on the phone by using 26 Bit Kit.

Use a T6 screwdriver bit to remove top two screws.

Use a J000 screwdriver bit to remove the bottom two screws.

Use a T3 screwdriver bit to remove the middle screw (close to camera).

Step 4

  • Use plastic opening tool to remove the bottom white cover as shown.

Use plastic opening tool to remove the bottom white cover as shown.

Step 5

  • There are two additional screws under the bottom white cover as shown.
  • Use T3 drivers to remove two additional screws as shown.

There are two additional screws under the bottom white cover as shown.

Use T3 drivers to remove two additional screws as shown.

Step 6

  • Using plastic opening tool, lift to remove the small black cover on the bottom left of phone as shown.
  • Then, using tweezers to lift the connector straight up to disconnect the battery’s circuit as shown.

Using plastic opening tool, lift to remove the small black cover on the bottom left of phone as shown.

Then, using tweezers to lift the connector straight up to disconnect the battery’s circuit as shown.

Step 7

  • Turn the phone onto its side and insert a flat object and gently remove cover, using plastic opening tool as shown.

Turn the phone onto its side and insert a flat object and gently remove cover, using plastic opening tool as shown.

Step 8

  • Flip over the black back cover and locate the speaker phone at the bottom, then use the tweezers to remove the speaker. It is glued to the back cover so a little force will be needed.

Flip over the black back cover and locate the speaker phone at the bottom, then use the tweezers to remove the speaker. It is glued to the back cover so a little force will be needed.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.

Author

                                      with 4 other contributors 


                    Bo Wu

Member since: 02/15/2017

292 Reputation

                                      2 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       USF Tampa, Team S5-G3, Lacy Spring 2017                        

                                                  Member of USF Tampa, Team S5-G3, Lacy Spring 2017 



                    USFT-LACY-S17S5G3                     


                                            3 Members                     


                                            2 Guides authored