Difficulty

Moderate

Steps

7

Time Required

                          30 minutes            

Sections

3

  • Battery
  • 2 steps
  • Headphone Jack
  • 4 steps
  • Speaker
  • 1 step

Flags

0

  • BackSony Xperia U

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery               
  • Set the phone screen down on a clean flat, surface.
  • Insert the plastic opening tool into the groove located between the body of the phone, and the back plate protecting the battery.
  • Open the back of the device by prying around the sides of the back panel using the plastic opening tool.

Set the phone screen down on a clean flat, surface.

Insert the plastic opening tool into the groove located between the body of the phone, and the back plate protecting the battery.

Open the back of the device by prying around the sides of the back panel using the plastic opening tool.

1024

Step 2

  • Insert the plastic opening tool in between the battery and the phone body.
  • Pry up on the side of battery, and remove it.

Insert the plastic opening tool in between the battery and the phone body.

Pry up on the side of battery, and remove it.

Step 3

              Headphone Jack               
  • Insert the plastic opening tool in between the white plastic cover, and the body of the phone.
  • Pop the plastic cover off. To do this, gently push forward on the plastic opening tool while it is in between the cover and the phone.

Insert the plastic opening tool in between the white plastic cover, and the body of the phone.

Pop the plastic cover off. To do this, gently push forward on the plastic opening tool while it is in between the cover and the phone.

Step 4

  • Remove the six size 0 Phillips screws.

Remove the six size 0 Phillips screws.

Step 5

  • Insert the plastic opening tool in between the body of the phone and the thin plastic back cover.
  • Lift the black back cover off of the body with the plastic tool.

Insert the plastic opening tool in between the body of the phone and the thin plastic back cover.

Lift the black back cover off of the body with the plastic tool.

Step 6

  • Locate the earphone jack on the top left of the black plastic back cover.
  • Use the tweezers to pinch the earphone jack and remove it from the back cover.

Locate the earphone jack on the top left of the black plastic back cover.

Use the tweezers to pinch the earphone jack and remove it from the back cover.

Step 7

              Speaker               
  • Using the tweezers, remove the loudspeaker module by firmly grasping it on one side, then slowly and carefully pulling the module in an upward direction.

Using the tweezers, remove the loudspeaker module by firmly grasping it on one side, then slowly and carefully pulling the module in an upward direction.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.                                             

Author

                                      with 7 other contributors 

                    Bader                     

Member since: 10/07/2014

545 Reputation

                                      4 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges                           

Team

                       USF Tampa, Team 7-2, Leahy Fall 2014                        

                                                  Member of USF Tampa, Team 7-2, Leahy Fall 2014 



                    USFT-LEAHY-F14S7G2                     


                                            4 Members                     


                                            5 Guides authored