Difficulty
Moderate
Steps
8
Time Required
40 minutes
Sections
2
- Motherboard
- 7 steps
- Rear Facing Camera
- 1 step
Flags
0
BackSony Xperia XA Ultra
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Motherboard
- Carefully remove the back panel of the phone with a plastic spudger, or other flat and thin wedge tool. Work your way around the perimeter of the case, loosening and prying gently, until there is sufficient distance between the panel and phone.
Carefully remove the back panel of the phone with a plastic spudger, or other flat and thin wedge tool. Work your way around the perimeter of the case, loosening and prying gently, until there is sufficient distance between the panel and phone.
1024
Step 2
- Remove all 9 black 4mm T5 screws.
- Remove all 8 silver 3mm T3 screws.
- Make sure to carefully place each screw in a secure location to avoid losing any.
Remove all 9 black 4mm T5 screws.
Remove all 8 silver 3mm T3 screws.
Make sure to carefully place each screw in a secure location to avoid losing any.
Step 3
- Near the top of the battery (area closest to camera) press the small latch in the highlighted area, push the latch away from the metal casing with the metal spudger.
- Use the plastic opening tool to pry off the metal case. Be sure to carefully pry the casing slowly and at multiple angles and directions to insure nothing is damaged.
- Be careful when prying near the top of the device. The metal casing can be easily bent.
Near the top of the battery (area closest to camera) press the small latch in the highlighted area, push the latch away from the metal casing with the metal spudger.
Use the plastic opening tool to pry off the metal case. Be sure to carefully pry the casing slowly and at multiple angles and directions to insure nothing is damaged.
Be careful when prying near the top of the device. The metal casing can be easily bent.
Step 4
- Remove the side bezels from each side, and remove the sim card cover.
Remove the side bezels from each side, and remove the sim card cover.
Step 5
- Using the plastic opening tool, gently pry off the black charge port plate, located near the bottom of the phone.
- Remove the sim card from sim card slot using fingernail or small plastic spudger.
Using the plastic opening tool, gently pry off the black charge port plate, located near the bottom of the phone.
Remove the sim card from sim card slot using fingernail or small plastic spudger.
Step 6
- Disconnect all four of the shown electrical connectors by gently prying up with the plastic opening tool.
Disconnect all four of the shown electrical connectors by gently prying up with the plastic opening tool.
Step 7
- Working from bottom to top, gently pry the motherboard off of the phone .
- The camera is connected to the motherboard. Be extremely careful when removing it to avoid damage.
Working from bottom to top, gently pry the motherboard off of the phone .
The camera is connected to the motherboard. Be extremely careful when removing it to avoid damage.
Step 8
Rear Facing Camera
- Using a plastic spudger, disconnect the camera from the motherboard.
Using a plastic spudger, disconnect the camera from the motherboard.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 2 other contributors
Forrest Lee
Member since: 09/22/2017
284 Reputation
2 Guides authored
Badges:
9
+6 more badges
Team
Central Washington University, Team S1-G3, Pengilly Fall 2017
Member of Central Washington University, Team S1-G3, Pengilly Fall 2017
CWU-PENGILLY-F17S1G3
4 Members
5 Guides authored
