Difficulty
Difficult
Steps
11
Time Required
20 minutes
Sections
2
- Charging port flex
- 9 steps
- Screen
- 2 steps
Flags
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
Better Introduction
Improve this guide by completing or revising its introduction.
BackSony Xperia Z5 Compact
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Charging port flex
- Power off and remove SIM card tray.
Power off and remove SIM card tray.
1024
Step 2
- Heat up the back cover to soften the adhesive.
- Place the suction cup to open a gap from top side, then insert guitar picks and slide it to cut the adhesive underneath.
- Remove back cover.
Heat up the back cover to soften the adhesive.
Place the suction cup to open a gap from top side, then insert guitar picks and slide it to cut the adhesive underneath.
Remove back cover.
Step 3
- Remove all 10 Phillips screws.
- Disconnect NFC clip and flashlight clip.
Remove all 10 Phillips screws.
Disconnect NFC clip and flashlight clip.
Step 4
- Remove the plastic bracket.
- Pry up and remove back frame.
Remove the plastic bracket.
Pry up and remove back frame.
Step 5
- Remove front camera.
Remove front camera.
Step 6
- Remove rear camera.
Remove rear camera.
Step 7
- Remove loudspeaker.
Remove loudspeaker.
Step 8
- Release charging port connector.
- Remove plastic protective bar.
- Pry up motherboard assembly from this side. There are three flex connectors connecting the motherboard underneath. So pry up the motherboard assembly gently.
Release charging port connector.
Remove plastic protective bar.
Pry up motherboard assembly from this side. There are three flex connectors connecting the motherboard underneath. So pry up the motherboard assembly gently.
Step 9
- Remove charging port flex.
Remove charging port flex.
Step 10
Screen
- Remove the motherboard/battery assembly.
- Using a spudger, release the battery connector from the motherboard.
Remove the motherboard/battery assembly.
Using a spudger, release the battery connector from the motherboard.
Step 11
- Using a suction cup, create a space between the screen and the phone.
- Using an opening tool, pry the LCD screen up.
Using a suction cup, create a space between the screen and the phone.
Using an opening tool, pry the LCD screen up.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 3 other contributors
Grant Conner
Member since: 02/20/2020
280 Reputation
3 Guides authored
Badges:
7
+4 more badges
Team
The Citadel Military College of South Carolina, Team S2-G9, Eggleston Spring 2020
Member of The Citadel Military College of South Carolina, Team S2-G9, Eggleston Spring 2020
CMCSC-EGGLESTON-S20S2G9
3 Members
5 Guides authored