Spin Master Boxer Robot Speaker Replacement Repair Guide

Difficulty

Difficult

Steps

7

Time Required

                          4 minutes            

Sections

2

• Robot Screen
• 5 steps
• Robot Speaker
• 2 steps

Flags

0

• BackSpin Master Boxer

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Robot Screen               

• Set Spin Master Boxer on your workspace so that the bottom panel faces upwards.

Set Spin Master Boxer on your workspace so that the bottom panel faces upwards.

1024

Step 2

• Using a Phillips #00 screw driver, unscrew the four 4mm screws in each corner of the bottom panel.

Using a Phillips #00 screw driver, unscrew the four 4mm screws in each corner of the bottom panel.

Step 3

• Carefully remove the bottom panel of the Spin Master Boxer by lifting up, away from the main body of robot.

Carefully remove the bottom panel of the Spin Master Boxer by lifting up, away from the main body of robot.

Step 4

• While holding onto the axels of the wheels, gently pull the top panel of the robot away from its body.
• Be aware when removing the panel that multiple wires connect it to the body of the Spin Master Boxer.

While holding onto the axels of the wheels, gently pull the top panel of the robot away from its body.

Be aware when removing the panel that multiple wires connect it to the body of the Spin Master Boxer.

Step 5

• Remove the plastic screen from the body of the robot. It should come off easily as it is not attached by anything.

Remove the plastic screen from the body of the robot. It should come off easily as it is not attached by anything.

Step 6

              Robot Speaker               

• Using a Phillips #00 screwdriver, unscrew the two 3mm screws connecting the black speaker cover to the top panel.

Using a Phillips #00 screwdriver, unscrew the two 3mm screws connecting the black speaker cover to the top panel.

Step 7

• Remove the speaker cover and you will be left looking at the speaker.
• The speaker is soldered onto the top panel so additional measures must be taken to completely remove it. See How To Solder and Desolder Connections

Remove the speaker cover and you will be left looking at the speaker.

The speaker is soldered onto the top panel so additional measures must be taken to completely remove it. See How To Solder and Desolder Connections

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 

                    Lauren Roide                     

Member since: 04/16/2019

739 Reputation

                                      5 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges                           

Team

                       Cal Poly, Team S1-G1, Maness Spring 2019                        

                                                  Member of Cal Poly, Team S1-G1, Maness Spring 2019 



                    CPSU-MANESS-S19S1G1                     


                                            4 Members                     


                                            5 Guides authored