Spy Net Ultra Vision Goggles Infrared Lights Replacement Repair Guide

Difficulty

Moderate

Steps

4

Time Required

                          15 - 30 minutes            

Sections

1

• Infrared Lights
• 4 steps

Flags

0

• BackSpy Net Ultra Vision Goggles

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Open the Device               

• Remove the six silver 11.4 mm Phillips #0 screws that hold the device shell in place.
• Pry open the shell using the plastic opening tools if necessary. To do this, locate the groves running along the side of the entire device and wedge it open.

Remove the six silver 11.4 mm Phillips #0 screws that hold the device shell in place.

Pry open the shell using the plastic opening tools if necessary. To do this, locate the groves running along the side of the entire device and wedge it open.

1024

Step 2

              Remove the Infrared Lights               

• Find the infrared light assemblies, which are located at the front end of the device on either side of the lens.
• The process is the same regardless of which light you are replacing.
• Lift the light assembly away from the rest of the device.

Find the infrared light assemblies, which are located at the front end of the device on either side of the lens.

The process is the same regardless of which light you are replacing.

Lift the light assembly away from the rest of the device.

Step 3

              Open the Light Assembly               

• Use the plastic opening tools to pry open the light assembly.

Use the plastic opening tools to pry open the light assembly.

Step 4

              Disconnect the Lights               

• Use the soldering iron and desoldering braid to de-solder the wires from the lights.
• Check out This Guide for tips on soldering and de-soldering connections.

Use the soldering iron and desoldering braid to de-solder the wires from the lights.

Check out This Guide for tips on soldering and de-soldering connections.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 2 other contributors 

                    Travis Kempf                     

Member since: 09/22/2014

198 Reputation

                                      1 Guide authored                  



                       Badges:
                       13







                                                        +10 more badges                           

Team

                       USF Tampa, Team 4-5, Brown Fall 2014                        

                                                  Member of USF Tampa, Team 4-5, Brown Fall 2014 



                    USFT-BROWN-F14S4G5                     


                                            3 Members                     


                                            6 Guides authored                     

vincentarriesgado - Sep 16, 2016

Reply

thanks for the help