Difficulty

Very easy

Steps

8

Time Required

                          5 minutes

Sections

1

  • Blade
  • 8 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackRéparation STERWINS 360ep 3w-1

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

Applicable for following machines :

STERWINS 1-33 1200W 33cm

STERWINS 360ep 3w-1

STERWINS 2-36 1400W 36cm

STERWINS 2-40 1700W 40cm

What you need

Step 1

              Blade
  • Turn the mower off and turn it over to access the blade.

Turn the mower off and turn it over to access the blade.

1024

Step 2

  • Position the correct size pipe wrench or socket wrench on the blade nut.
  • Lock the blade in the opposite direction of unscrewing with a piece of wood and hold it firmly.

Position the correct size pipe wrench or socket wrench on the blade nut.

Lock the blade in the opposite direction of unscrewing with a piece of wood and hold it firmly.

Step 3

  • Unscrew the blade nut while firmly holding the blade shim.

Unscrew the blade nut while firmly holding the blade shim.

Step 4

  • Remove the blade fixing bolt and its washer. Place them close, they will be reused to fix the new blade.

Remove the blade fixing bolt and its washer. Place them close, they will be reused to fix the new blade.

Step 5

  • Remove the worn blade from its holder.

Remove the worn blade from its holder.

Step 6

  • Place the new blade on the support, matching the shape of the support pins with the cutouts on the blade.

Place the new blade on the support, matching the shape of the support pins with the cutouts on the blade.

Step 7

  • Insert the fixing bolt with its washer and start to screw it by hand into the blade holder.

Insert the fixing bolt with its washer and start to screw it by hand into the blade holder.

Step 8

  • Using the shim and the pipe or socket wrench used for disassembly, tighten the blade fixing bolt.
  • Check the blade tightness using a torque wrench. The tightening must be 40 Nm.

Using the shim and the pipe or socket wrench used for disassembly, tighten the blade fixing bolt.

Check the blade tightness using a torque wrench. The tightening must be 40 Nm.

Well done, you just replaced your blade

Cancel: I did not complete this guide.

        These translators are helping us fix the world!      Want to contribute?      Start translating ›

Special thanks to these translators:

100%

Clément Delporte

ernestc

Author

                                      with 1 other contributor 


                    Clément Delporte

Member since: 06/10/2020

357 Reputation

                                      1 Guide authored                  



                       Badges:
                       5







                                                        +2 more badges