Difficulty

Moderate

Steps

4

Time Required

                          15 minutes            

Sections

2

  • Outer Case
  • 2 steps
  • Power Switch
  • 2 steps

Flags

0

  • BackSuper Nintendo

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Outer Case               
  • Remove the six screws located on the underside of the system using the Gamebit 4.5mm screwdriver.

Remove the six screws located on the underside of the system using the Gamebit 4.5mm screwdriver.

1024

Step 2

  • Carefully flip the unit back over.
  • Locate the seam. Lift and separate the upper half of the case from the lower half of the case.

Carefully flip the unit back over.

Locate the seam. Lift and separate the upper half of the case from the lower half of the case.

Step 3

              Power Switch               
  • Remove the two 11.7 mm Phillips #2 screws connecting the power switch to the motherboard.

Remove the two 11.7 mm Phillips #2 screws connecting the power switch to the motherboard.

Step 4

  • The power switch is connected to the motherboard near the top left of the console.
  • Carefully pull the connector from its socket on the motherboard. You may need to wiggle it out as you pull.
  • Do not detach the connector by pulling on the wires. This could damage the wires or the socket.

The power switch is connected to the motherboard near the top left of the console.

Carefully pull the connector from its socket on the motherboard. You may need to wiggle it out as you pull.

Do not detach the connector by pulling on the wires. This could damage the wires or the socket.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      16 other people completed this guide.                                             

Author

                                      with 11 other contributors 

                    Cameron Deines                     

Member since: 10/05/2010

697 Reputation

                                      2 Guides authored                  



                       Badges:
                       13







                                                        +10 more badges                           

Team

                       Cal Poly, Team 4-47, Amido Fall 2010                        

                                                  Member of Cal Poly, Team 4-47, Amido Fall 2010 



                    CPSU-AMIDO-F10S4G47                     


                                            4 Members                     


                                            20 Guides authored