Supersonic Matrix Mid Sc 999 Camera Replacement Repair Guide

Difficulty

Moderate

Steps

11

Time Required

Suggest a time??

Sections

1

• Camera
• 11 steps

Flags

2

In Progress

This guide is a work in progress. Reload periodically to see the latest changes!

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

• BackSuperSonic Matrix Mid SC-999

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

What you need

Step 1

              Opening the Back               

• Open up the back on the tablet.

Open up the back on the tablet.

1024

Step 2

              Finding the Camera               

• Locate the camera.
• Unscrew the two screws.

Locate the camera.

Unscrew the two screws.

Step 3

              Unscrewing the Cover               

• Use the J0 Phillps screw driver to unscrew the the two small screws on either side of the black peice.

Use the J0 Phillps screw driver to unscrew the the two small screws on either side of the black peice.

Step 4

              Opening Up to the Camera               

• Pull the black camera cover off and locate the camera with two gold bands running off upwards and to the right.

Pull the black camera cover off and locate the camera with two gold bands running off upwards and to the right.

Step 5

              Finding Where the Camera and Motherboard Meet               

• Follow the gold band the runs up towards the white and grey box connected to the green plate.

Follow the gold band the runs up towards the white and grey box connected to the green plate.

Step 6

              Unhocking the Camera from Motherboard               

• Use the wedge from step one to lift the grey box up.
• The grey piece should open up towards you.

Use the wedge from step one to lift the grey box up.

The grey piece should open up towards you.

Step 7

              Finding the Camera Pt. 2               

• Now turn your attention back the camera.

Now turn your attention back the camera.

Step 8

              Finding the Front Camera               

• Next, Follow the second gold band to right to the white paper, or the front camra.

Next, Follow the second gold band to right to the white paper, or the front camra.

Step 9

              Unhocking the Front Camera from device               

• Now, carefully remove the front camera with the same wedge from step one, six, and eight.

Now, carefully remove the front camera with the same wedge from step one, six, and eight.

Step 10

              Unhocking the Back Camera from Device               

• Use the same wedge used in step one and step six to go under the camera and carefully pry away from the sivler plating.

Use the same wedge used in step one and step six to go under the camera and carefully pry away from the sivler plating.

Step 11

              Taking the Camra System Off the Device.               

• When the camera becomes loose, gental pull up and out to the right to silde the gold band out of the white and grey box.

When the camera becomes loose, gental pull up and out to the right to silde the gold band out of the white and grey box.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 

                    Logan Robinson                     

Member since: 09/18/2018

493 Reputation

                                      3 Guides authored                  



                       Badges:
                       2