Difficulty

Moderate

Steps

5

Time Required

                          10 - 15 minutes

Sections

2

  • Back Cover
  • 3 steps
  • Headphone Jack
  • 2 steps

Flags

0

  • BackSuperSonic Matrix Mid SC-999

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

Because this task requires the use of a soldering iron, prior experience with soldering/desoldering will be beneficial.

What you need

Step 1

              Back Cover
  • Wedge the plastic opening tool between the back cover of the device and the front panel.
  • You will hear a snapping sound as the cover is separated from the body of the device.

Wedge the plastic opening tool between the back cover of the device and the front panel.

You will hear a snapping sound as the cover is separated from the body of the device.

1024

Step 2

  • Slide the opening tool along the seam between the front panel and the back cover to un-clip the remaining connections around the device.
  • Again, you will hear a snapping sound as the cover is separated from the body of the device.

Slide the opening tool along the seam between the front panel and the back cover to un-clip the remaining connections around the device.

Again, you will hear a snapping sound as the cover is separated from the body of the device.

Step 3

  • Lift the back cover from the body of the device to expose the internal components.

Lift the back cover from the body of the device to expose the internal components.

Step 4

              Headphone Jack
  • Locate the headphone jack on the device.

Locate the headphone jack on the device.

Step 5

  • Desolder the 5 soldered connections (marked in red) that connect the headphone jack to the device.
  • If you’re unfamiliar with soldering or desoldering check out this guide.
  • Be sure to wear protective eye wear. The soldering iron will become extremely hot, so be mindful in your handling.

Desolder the 5 soldered connections (marked in red) that connect the headphone jack to the device.

If you’re unfamiliar with soldering or desoldering check out this guide.

Be sure to wear protective eye wear. The soldering iron will become extremely hot, so be mindful in your handling.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 


                    Harris Dagha

Member since: 03/26/2015

866 Reputation

                                      7 Guides authored                  



                       Badges:
                       15







                                                        +12 more badges

Team

                       Dr Shaverz boyz                        

                                                  Member of Dr Shaverz boyz 



                    Community                     


                                            3 Members                     


                                            14 Guides authored