Difficulty
Easy
Steps
3
Time Required
10 minutes
Sections
1
- Exhaust Pipe
- 3 steps
Flags
0
BackSuzuki FA50 Moped
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Exhaust Pipe
- Use a #2 Phillips screwdriver to remove the heat shield from the muffler.
Use a #2 Phillips screwdriver to remove the heat shield from the muffler.
1024
Step 2
- There are two 10 mm hex nuts attaching the muffler to the engine. Make sure you remove both of them before proceeding to the next step.
- Use a 10 mm socket wrench to unscrew the two hex nuts.
There are two 10 mm hex nuts attaching the muffler to the engine. Make sure you remove both of them before proceeding to the next step.
Use a 10 mm socket wrench to unscrew the two hex nuts.
Step 3
- Use a 12 mm socket wrench to unscrew the third and final hex nut that holds the muffler in place.
- Make sure to support the muffler with your hand while removing this nut, otherwise it may just fall to the floor.
Use a 12 mm socket wrench to unscrew the third and final hex nut that holds the muffler in place.
Make sure to support the muffler with your hand while removing this nut, otherwise it may just fall to the floor.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 2 other contributors
Miroslav Djuric
156,282 Reputation
144 Guides authored
Badges:
54
+51 more badges
D4Tay - Jul 4, 2021
Reply
Thanks you very much! Happy Fourth of July.