Suzuki Gsxr 1000 K4 Battery Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          15 minutes

Sections

Battery
6 steps

Flags

BackSuzuki GSXR 1000 K4
Full Screen
Options
History
Save to Favorites
Download PDF
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

What you need

Step 1

              Battery

Suzuki GSXR 1000 K4

Suzuki GSXR 1000 K4

1024

Step 2

First you have to remove the screws with an Imbus key (size 4) on the left and right side.

First you have to remove the screws with an Imbus key (size 4) on the left and right side.

Step 3

You can now completely remove the seat.

You can now completely remove the seat.

Step 4

The screws can now be removed from the battery with a screwdriver PH 3 (alternatively a wrench or a socket wrench size 10 can be used).
Attention! There are nuts under the screws. These are not attached, so care must be taken when removing the screws that the nuts are not lost.
Before installation, both battery poles should be treated with polar grease or polish spray. Otherwise it can lead to corrosion, which can lead to contact problems.

The screws can now be removed from the battery with a screwdriver PH 3 (alternatively a wrench or a socket wrench size 10 can be used).

Attention! There are nuts under the screws. These are not attached, so care must be taken when removing the screws that the nuts are not lost.

Before installation, both battery poles should be treated with polar grease or polish spray. Otherwise it can lead to corrosion, which can lead to contact problems.

Step 5

You can now seat the battery in its slot

You can now seat the battery in its slot

Step 6

Before the battery can be reconnected all power consumers (light, ignition, etc.) must be shut off.
To prevent a short circuit and other damage to the motorcycle, make sure that the positive pole must first be connected !!!!!
After the positive pole is attached, it should be protected with the cover provided. If the cover is defective, it must be replaced. This protection is also a relevant criterion for TÜV.
After the plus pole is attached and protected, the negative pole can be attached.

Before the battery can be reconnected all power consumers (light, ignition, etc.) must be shut off.

To prevent a short circuit and other damage to the motorcycle, make sure that the positive pole must first be connected !!!!!

After the positive pole is attached, it should be protected with the cover provided. If the cover is defective, it must be replaced. This protection is also a relevant criterion for TÜV.

After the plus pole is attached and protected, the negative pole can be attached.

To put the device back together follow the steps in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             


        These translators are helping us fix the world!      Want to contribute?      Start translating ›

Special thanks to these translators:

100%

Alex Niculescu

irlanda

Author

                                      with 2 other contributors

                    Bianca Mueller

Member since: 11/24/2016

266 Reputation

                                      2 Guides authored                  



                       Badges:
                       3

Team

                       iFixit EU Team                        

                                                  Member of iFixit EU Team 



                    Community                     


                                            51 Members                     


                                            4,975 Guides authored

What you need#

Team#

What you need

Team