Swagtron T1 Back Panels Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          10 - 20 minutes

Sections

Back Panels
3 steps

Flags

BackSwagTron T1
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Back Panels

Ensure that the SwagTron is off.
Turn the SwagTron upside down to see the underside.

Ensure that the SwagTron is off.

Turn the SwagTron upside down to see the underside.

1024

Step 2

Unscrew the eighteen 10mm screws that secure the back panels using a Phillips #2 screwdriver.
The screws are tightly in place. It will take effort to screw them out.
The panel is still attached to the SwagTron by wires that go to the motherboard.
Carefully lift the panels off

Unscrew the eighteen 10mm screws that secure the back panels using a Phillips #2 screwdriver.

The screws are tightly in place. It will take effort to screw them out.

The panel is still attached to the SwagTron by wires that go to the motherboard.

Carefully lift the panels off

Step 3

Follow the wires from the panels to the motherboard.
You may need to cut any zip ties that are holding the wires together.
There is one connection on the battery side and three on the other side that must be removed.
These connections may be difficult to remove. Try to securely press the connection and pull firmly.
Your back panels are now completely removed.

Follow the wires from the panels to the motherboard.

You may need to cut any zip ties that are holding the wires together.

There is one connection on the battery side and three on the other side that must be removed.

These connections may be difficult to remove. Try to securely press the connection and pull firmly.

Your back panels are now completely removed.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 4 other contributors

                    Adrian Abarca

Member since: 04/18/2017

336 Reputation

                                      2 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       Cal Poly, Team S17-G5, Banghart Spring 2017                        

                                                  Member of Cal Poly, Team S17-G5, Banghart Spring 2017 



                    CPSU-BANGHART-S17S17G5                     


                                            4 Members                     


                                            5 Guides authored

Introduction#

What you need#

#

#

#

#

#

Team#

#

Introduction

What you need

Team