Tagital T9X Camera Replacement Repair Guide

Difficulty

Moderate

Steps

5

Time Required

Suggest a time??

Sections

2

• Back Cover
• 2 steps
• Camera
• 3 steps

Flags

Missing Prerequisites

This guide is missing information on how to start the process. Make a prerequisite guide!

Better Introduction

Improve this guide by completing or revising its introduction.

• BackTagital T9X

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

What you need

Step 1

              Back Cover               

• With the tablet turned off, remove the two 5mm Phillips head screws from the top of the tablet.
• These screws are extremely easy to lose. Be sure to store them in a safe place.

With the tablet turned off, remove the two 5mm Phillips head screws from the top of the tablet.

These screws are extremely easy to lose. Be sure to store them in a safe place.

1024

Step 2

• Use a 1 cm wide plastic opening tool to remove the back panel. Go around the entire back panel to ensure safe removal.
• The power, return, and volume buttons are not firmly secured to the panel; it is likely they will fall off in the process of removing the panel.

Use a 1 cm wide plastic opening tool to remove the back panel. Go around the entire back panel to ensure safe removal.

The power, return, and volume buttons are not firmly secured to the panel; it is likely they will fall off in the process of removing the panel.

Step 3

              Camera               

• Using tweezers, carefully remove the cloth covering from the ribbon connector for the camera.

Using tweezers, carefully remove the cloth covering from the ribbon connector for the camera.

Step 4

• Use the tip of the spudger or your fingernail to flip up the small flap on the ZIF connector.
• Carefully remove the ribbon cable from the connector.

Use the tip of the spudger or your fingernail to flip up the small flap on the ZIF connector.

Carefully remove the ribbon cable from the connector.

Step 5

• Remove the camera from its position at the top of the tablet.

Remove the camera from its position at the top of the tablet.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 

                    Adam Bamforth                     

Member since: 02/01/2016

517 Reputation

                                      4 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges                           

Team

                       University of Kentucky Louisville, Team 1-1, Matravers Spring 2016                        

                                                  Member of University of Kentucky Louisville, Team 1-1, Matravers Spring 2016 



                    LOUISVILLE-MATRAVERS-S16S1G1                     


                                            4 Members                     


                                            12 Guides authored