Taotronics Tt Ba07 Battery Replacement Repair Guide

Difficulty

Difficult

Steps

4

Time Required

Suggest a time??

Sections

1

• Battery
• 4 steps

Flags

0

• BackTaoTronics TT-BA07

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Battery               

• Remove the rubber pad from the bottom of the device by using the nylon spudger to pry the glue holding it together. Then use the spudger to remove the rubber pad.

Remove the rubber pad from the bottom of the device by using the nylon spudger to pry the glue holding it together. Then use the spudger to remove the rubber pad.

1024

Step 2

• Unscrew the four 6mm screws located under pad using the PH0 screwdriver head and lift plastic cover using the nylon spudger. Be careful not to sever the wire that leads to the circuit board.

Unscrew the four 6mm screws located under pad using the PH0 screwdriver head and lift plastic cover using the nylon spudger. Be careful not to sever the wire that leads to the circuit board.

Step 3

• Use the nylon spudger and the plastic opening tool to lift up the battery from the casing. Use the spudger on one side and the plastic opening tool on the other.

Use the nylon spudger and the plastic opening tool to lift up the battery from the casing. Use the spudger on one side and the plastic opening tool on the other.

Step 4

• You may damage your device in this step and may ruin your battery in the process.
• To remove battery, cut the wires that connect to the battery.
• To reconnect battery, solder wires back onto new battery.
• For soldering help, check out iFixit’s How to Solder and Desolder Connections guide.

You may damage your device in this step and may ruin your battery in the process.

To remove battery, cut the wires that connect to the battery.

To reconnect battery, solder wires back onto new battery.

For soldering help, check out iFixit’s How to Solder and Desolder Connections guide.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.                                             

Author

                                      with 3 other contributors 

                    Niko Fabian                     

Member since: 03/06/2016

715 Reputation

                                      5 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges                           

Team

                       UMass Dartmouth, Team 5-7, Landers Spring 2016                        

                                                  Member of UMass Dartmouth, Team 5-7, Landers Spring 2016 



                    UMASSD-LANDERS-S16S5G7                     


                                            3 Members                     


                                            5 Guides authored                     

lynnecallaghan - Jun 16, 2018

Reply

What is battery spec and how can i get one?

Mike

doa1942 - Sep 11, 2018

Reply

Hola. Donde puedo comprar una bateria para este modelo. Soy de Argentina

Xan - Dec 28, 2018

Reply

Battery spec contained in my unit:

7V 2600mAh 19.24Wh

CM-18650T-2S

Notes: There was a lot of “glue” on my unit between the battery and back facing side of the battery well. I used Popsicle sticks to work the glue loose before I was able to more confidently pull the battery out.

greatvalueseeker - Feb 1, 2019

Reply

Does anyone know how to convert this to direct USB power or power adapter? I know that I can charge it using USB, but I think the battery in my unit is almost dead because it doesn’t last long. If I keep it plugged to USB while using it, it turns off after some time, again probably because of the bad battery.

rstrasdauskas - Apr 7, 2020

Reply

I appreciate the information but in THIS case it is mot worth the expense and effort to refurbish a $25 unit. Thank again for the effort