Tc We825S Power Button Replacement Repair Guide

Difficulty

Moderate

Steps

7

Time Required

                          15 minutes            

Sections

1

• TC-WE825S Power Button
• 7 steps

Flags

0

• BackCassette Player

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              TC-WE825S Power Button               

• Unscrew the 8mm Phillips head screws from the left and right sides of the cassette player.

Unscrew the 8mm Phillips head screws from the left and right sides of the cassette player.

1024

Step 2

• Unscrew the 8mm Phillips head screw from the back of the cassette panel. Remove the cover.

Unscrew the 8mm Phillips head screw from the back of the cassette panel. Remove the cover.

Step 3

• Locate the power cord connection and disconnect it. To remove it, press down on the plastic tab and slowly slide it out of the socket.

Locate the power cord connection and disconnect it. To remove it, press down on the plastic tab and slowly slide it out of the socket.

Step 4

• Locate the cords that are connected to the power button. Remove the connection by tugging on the cords gently, releasing them from the main PC board.

Locate the cords that are connected to the power button. Remove the connection by tugging on the cords gently, releasing them from the main PC board.

Step 5

• Unscrew all five 7.5mm Phillips head screws from the PCB (printed circuit board) behind the power switch.

Unscrew all five 7.5mm Phillips head screws from the PCB (printed circuit board) behind the power switch.

Step 6

• Use forceps to gently pry the PCB from the frame of the cassette player.

Use forceps to gently pry the PCB from the frame of the cassette player.

Step 7

• Use a soldering iron to desolder the power switch’s terminals and connections. Remove the power switch, replace it, and solder it back together. Repeat these steps in reverse order to put the cassette player back together.

Use a soldering iron to desolder the power switch’s terminals and connections. Remove the power switch, replace it, and solder it back together. Repeat these steps in reverse order to put the cassette player back together.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 4 other contributors 

                    Cameron                     

Member since: 06/01/2016

108 Reputation

                                      1 Guide authored                  



                       Badges:
                       2

Team

                       Central Coast New Tech High, Team 5-6, Rushing Spring 2016                        

                                                  Member of Central Coast New Tech High, Team 5-6, Rushing Spring 2016 



                    CCNTH-RUSHING-S16S5G6                     


                                            2 Members                     


                                            1 Guide authored