Difficulty

Moderate

Steps

7

Time Required

Suggest a time??

Sections

2

  • Speaker Guard
  • 4 steps
  • Speaker
  • 3 steps

Flags

1

Missing Details

Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.

  • BackTDK Life on Record A33

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Speaker Guard
  • Push the nylon or metal spudger in the corner of the speaker guard.

Push the nylon or metal spudger in the corner of the speaker guard.

1024

Step 2

  • Slowly lift the speaker up enough so that you can slide around the speaker guard.

Slowly lift the speaker up enough so that you can slide around the speaker guard.

Step 3

  • Slide the nylon or metal spudger all around the speaker guard.

Slide the nylon or metal spudger all around the speaker guard.

Step 4

  • Remove the speaker guard. You can now replace the speaker guard on your TDK Life on Record A33.

Remove the speaker guard. You can now replace the speaker guard on your TDK Life on Record A33.

Step 5

              Speaker
  • Remove all (4) 3mm screws in the middle speaker using a Phillip’s head screwdriver.
  • You can also remove the speakers on the left and right.

Remove all (4) 3mm screws in the middle speaker using a Phillip’s head screwdriver.

You can also remove the speakers on the left and right.

Step 6

  • Do not rip the wires inside the speaker when trying to open the middle speaker on the device.
  • Create an opening in the speaker by holding the device up and carefully grabbing the side of the speaker that pops out.

Do not rip the wires inside the speaker when trying to open the middle speaker on the device.

Create an opening in the speaker by holding the device up and carefully grabbing the side of the speaker that pops out.

Step 7

  • Wear safety goggles and have something to absorb the smoke from the soldering iron just in case.
  • Do not burn the wires of the speaker.
  • Remove the solder that connects the wires to the speaker. You should be able to now remove the speaker and replace it.

Wear safety goggles and have something to absorb the smoke from the soldering iron just in case.

Do not burn the wires of the speaker.

Remove the solder that connects the wires to the speaker. You should be able to now remove the speaker and replace it.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 2 other contributors 


                    Matthew Phou

Member since: 10/20/2015

448 Reputation

                                      2 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges

Team

                       UMass Dartmouth, Team 4-2, Catania Fall 2015                        

                                                  Member of UMass Dartmouth, Team 4-2, Catania Fall 2015 



                    UMASSD-CATANIA-F15S4G2                     


                                            4 Members                     


                                            5 Guides authored

stevealvarado54 - Jun 11, 2016

Reply

Where can I buy the woofer?

Van Moon - Jan 14, 2017

Reply

Really, stevealvarado! What’s The point of taking this all apart if you don’t have a replacement to put in?