Difficulty

Moderate

Steps

6

Time Required

Suggest a time??

Sections

1

  • Blaupunkt LCD-TV BW39B68BFBKUE480 Rocker Switch Kipp Netzschalter RS601D
  • 6 steps

Flags

5

Grammar Police

Embrace your inner English teacher and help improve this guide’s grammar!

In Progress

This guide is a work in progress. Reload periodically to see the latest changes!

Needs More Images

A few more images would make this guide’s procedures crystal clear.

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackTelevision

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Blaupunkt LCD-TV BW39B68BFBKUE480 Rocker Switch Kipp Netzschalter RS601D
  • The removal of the power switch is quite simple. First, open the case by removing all the screws on the rear panel marked with an arrow. (ATTENTION: different lengths and thickness! - when unscrewing remember which screw belongs where.

The removal of the power switch is quite simple. First, open the case by removing all the screws on the rear panel marked with an arrow. (ATTENTION: different lengths and thickness! - when unscrewing remember which screw belongs where.

1024

Step 2

  • Carefully remove the back panel. Disconnect the cables that prevent the rear panel from lifting off. Use a pair of needle nose pliers to squeeze the retaining clips that hold the switch in the TV housing. Unclip the switch from the TV housing. (if necessary, use a flat screwdriver)

Carefully remove the back panel. Disconnect the cables that prevent the rear panel from lifting off. Use a pair of needle nose pliers to squeeze the retaining clips that hold the switch in the TV housing. Unclip the switch from the TV housing. (if necessary, use a flat screwdriver)

Step 3

  • You should have some electrotechnical knowledge so that you will be able to correctly position the connectors on the new switch will . Now just clip on the switch. Plug in the disconnected cables. Fit rear panel and screw in all screws again.

You should have some electrotechnical knowledge so that you will be able to correctly position the connectors on the new switch will . Now just clip on the switch. Plug in the disconnected cables. Fit rear panel and screw in all screws again.

Step 4

  • Description on the original switch: LECI RS601D more details 6 (4) A250VAC new line: 10A 125VAC - other side: 6A250VAC new line: 6A / 125A250VAC - My problem was that the power switch was broken and the TV could only be switched on sporadically.

Description on the original switch: LECI RS601D more details 6 (4) A250VAC new line: 10A 125VAC - other side: 6A250VAC new line: 6A / 125A250VAC - My problem was that the power switch was broken and the TV could only be switched on sporadically.

Step 5

  • On Ebay, the switch RS601D (as of June 2017), is available as an original from China. An alternative: Since I just had it on hand, I installed the following switch from Pollin: # 420427 (unfortunately, no indication of inrush current found)

On Ebay, the switch RS601D (as of June 2017), is available as an original from China. An alternative: Since I just had it on hand, I installed the following switch from Pollin: # 420427 (unfortunately, no indication of inrush current found)

Step 6

  • Probably also suitable: Marquardt 1858.1103 rocker switch, black, plug-in 4.8 mm, 10 (4.0) A / 250 VAC, 6.0 (4.0) A / 250 VAC e.g. from Bürklin: # 11 G 2854 - € 1.94

Probably also suitable: Marquardt 1858.1103 rocker switch, black, plug-in 4.8 mm, 10 (4.0) A / 250 VAC, 6.0 (4.0) A / 250 VAC e.g. from Bürklin: # 11 G 2854 - € 1.94

As already mentioned - connect the cable to the new switch and snap the snap-in switch back into the housing. Replace the back panel and screw in the screws again where they were screwed out.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             


        These translators are helping us fix the world!      Want to contribute?      Start translating ›

Special thanks to these translators:

100%

Niels

Annika Faelker

oldturkey03

Author

                                      with 3 other contributors 


                    dieter

Member since: 11/19/2011

307 Reputation

                                      2 Guides authored                  



                       Badges:
                       4







                                                        +1 more badge