Texas Instruments Ti 5130 Printer Unit Replacement Repair Guide

Difficulty

Moderate

Steps

5

Time Required

                          5 - 10 minutes            

Sections

1

• Printer Unit
• 5 steps

Flags

0

• BackTexas Instruments TI-5130

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Printer Unit               

• Flip the calculator over and remove the 4 main 10mm screws with a PH1 screwdriver.

Flip the calculator over and remove the 4 main 10mm screws with a PH1 screwdriver.

1024

Step 2

• Flip the calculator back over and remove the top cover.

Flip the calculator back over and remove the top cover.

Step 3

• Disconnect the printing unit from the motherboard by pulling up on the connector – located in the bottom left of the motherboard.

Disconnect the printing unit from the motherboard by pulling up on the connector – located in the bottom left of the motherboard.

Step 4

• Remove the ink cartridge by pushing the tab back then lifting it out to gain access to the screw that holds the printer in place.

Remove the ink cartridge by pushing the tab back then lifting it out to gain access to the screw that holds the printer in place.

Step 5

• Using a PH1 screwdriver remove the 10mm screw that holds down the printer unit.
• Remove the printer unit by lifting it up.

Using a PH1 screwdriver remove the 10mm screw that holds down the printer unit.

Remove the printer unit by lifting it up.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.                                             

Author

                                      with 1 other contributor 

                    Shannon Perkins                     

Member since: 09/17/2015

625 Reputation

                                      3 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges                           

Team

                       USF Sarasota-Manatee, Team 1-2, Stewart Fall 2015                        

                                                  Member of USF Sarasota-Manatee, Team 1-2, Stewart Fall 2015 



                    USFSM-STEWART-F15S1G2                     


                                            5 Members                     


                                            16 Guides authored                     

Tino ullrich - Mar 4, 2017

Reply

wehre did you buy the replacement printer