Difficulty
Moderate
Steps
4
Time Required
10 minutes
Sections
1
- Front Buttons
- 4 steps
Flags
0
BackThe Beatles Rock Band Drum Set
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Front Buttons
- Remove the four Phillips size J1 screws from the corners of the bottom module.
- Removing the screws requires a thin screwdriver.
Remove the four Phillips size J1 screws from the corners of the bottom module.
Removing the screws requires a thin screwdriver.
1024
Step 2
- Open the bottom module. Disconnect the five wire clips as shown in the pictures.
Open the bottom module. Disconnect the five wire clips as shown in the pictures.
Step 3
- Remove the four Phillips #1 sized screws holding the main circuit board. Rotate the board up and out, exposing the buttons.
Remove the four Phillips #1 sized screws holding the main circuit board. Rotate the board up and out, exposing the buttons.
Step 4
- The buttons can be pushed up from the bottom to be removed.
The buttons can be pushed up from the bottom to be removed.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Zach Richter
Member since: 01/24/2017
525 Reputation
5 Guides authored
Badges:
7
+4 more badges
Team
Cal Poly, Team 13-3, Banghart Winter 2017
Member of Cal Poly, Team 13-3, Banghart Winter 2017
CPSU-BANGHART-W17S13G3
4 Members
5 Guides authored
