The Claw Item Replacement Repair Guide

Difficulty

Easy

Steps

11

Time Required

                          5 - 10 minutes            

Sections

2

• Top Cover
• 7 steps
• Overfill
• 4 steps

Flags

1

Mismatched Prerequisites

This guide does not have a proper prerequisite guide. Help match it to its ideal partner by finding it or writing one!

• BackThe Claw

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Top Cover               

• Place The Claw machine in the up-right position with the control knobs facing you.

Place The Claw machine in the up-right position with the control knobs facing you.

1024

Step 2

• Turn The Claw machine upside-down placing the top cover on the surface of your work area.

Turn The Claw machine upside-down placing the top cover on the surface of your work area.

Step 3

• Remove all ten 6mm phillips #1 screws underneath the top cover using your #1 phillips head screwdriver.
• It is helpful to choose a clear, well lit work space. There are multiple tiny screws that are easy to lose.

Remove all ten 6mm phillips #1 screws underneath the top cover using your #1 phillips head screwdriver.

It is helpful to choose a clear, well lit work space. There are multiple tiny screws that are easy to lose.

Step 4

• Turn The Claw machine back to the upright position with controls facing you.

Turn The Claw machine back to the upright position with controls facing you.

Step 5

• Remove the top cover of The Claw machine.

Remove the top cover of The Claw machine.

Step 6

• Remove the ten 6 mm phillips #1 screws from the top flange.

Remove the ten 6 mm phillips #1 screws from the top flange.

Step 7

• Lift the flange upward and off to the side of the machine.
• There is enough wire connecting the flange to the machine that you will not need to cut the wire. The flange can be moved off to the side of the machine while you are working.
• Cutting or ripping out the wire will cause damage to the machine so try not to put much tension on the wire.

Lift the flange upward and off to the side of the machine.

There is enough wire connecting the flange to the machine that you will not need to cut the wire. The flange can be moved off to the side of the machine while you are working.

Cutting or ripping out the wire will cause damage to the machine so try not to put much tension on the wire.

Step 8

              Overfill               

• After emptying out contents have The Claw machine facing you

After emptying out contents have The Claw machine facing you

Step 9

• View the Claw machine from the top

View the Claw machine from the top

Step 10

• Place thumb on grip section and pull away from the Claw machine.

Place thumb on grip section and pull away from the Claw machine.

Step 11

• Place items in the Claw machine.

Place items in the Claw machine.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 

                    Alain Pierre                     

Member since: 03/22/2016

1,149 Reputation

                                      9 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges                           

Team

                       UMass Dartmouth, Team 4-8, Catania Spring 2016                        

                                                  Member of UMass Dartmouth, Team 4-8, Catania Spring 2016 



                    UMASSD-CATANIA-S16S4G8                     


                                            3 Members                     


                                            9 Guides authored