The Pave Parisien Speaker Battery Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          10 minutes

Sections

Battery
10 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

BackLe Pavé Parisien
Full Screen
Options
History
Save to Favorites
Download PDF
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

Step 1

              Remove the grille

Remove the protective grille by lifting one of the four corners.

Remove the protective grille by lifting one of the four corners.

1024

Step 2

              Opening the speaker

Remove the four screws using a m4 allen wrench

Remove the four screws using a m4 allen wrench

Step 3

              Disconnecting the speaker

Pull the speaker out a bit to access the connectors
With light gentle movements, pull and disconnect the two cables from the connections

Pull the speaker out a bit to access the connectors

With light gentle movements, pull and disconnect the two cables from the connections

Step 4

              Pulling the board out of the case

Pull the speaker completely out of the recessed compartment
Gently pull the board behind the speaker out and place on a flat surface

Pull the speaker completely out of the recessed compartment

Gently pull the board behind the speaker out and place on a flat surface

Step 5

              Disconnecting the battery

Disconnect the battery connector from the board
Be careful to pull gently using a small screwdriver to pry up the clip, then apply gentle pressure

Disconnect the battery connector from the board

Be careful to pull gently using a small screwdriver to pry up the clip, then apply gentle pressure

Step 6

              Removing the battery

Push the battery from the rear towards the opening where the wires are
The battery is out and now it can be changed

Push the battery from the rear towards the opening where the wires are

The battery is out and now it can be changed

Step 7

              Connecting the new battery

Pass the connector through the space that is indicated for it

Pass the connector through the space that is indicated for it

Step 8

              Reinstalling the board

The texture of this surface is different from the other three faces. Orient yourself to how it fits correctly.

The texture of this surface is different from the other three faces. Orient yourself to how it fits correctly.

Step 9

              Reinstalling the speaker

First connect the positive and negative wires, then slide the speaker in the enclosure in the right orientation

First connect the positive and negative wires, then slide the speaker in the enclosure in the right orientation

Step 10

              Finished

Finally replace the speaker grill: your Pave Parisien is ready to use!

Finally replace the speaker grill: your Pave Parisien is ready to use!

Cancel: I did not complete this guide.

        These translators are helping us fix the world!      Want to contribute?      Start translating ›

Special thanks to these translators:

100%

jeremyfitz

Typo

Author

                                      with 2 other contributors

                    Le Pavé Parisien

Member since: 04/03/2019

529 Reputation

                                      4 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges

Member-Contributed Guide#

Introduction#

Member-Contributed Guide

Introduction