Difficulty
Moderate
Steps
3
Time Required
15 - 20 minutes
Sections
2
- Top cover
- 2 steps
- 5-pin USB Cord
- 1 step
Flags
0
BackThermaltake Theron Plus
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Top cover
- Remove the plastic cover and pack of weights.
- Remove the two 1.0 mm foam covers with tweezers.
- Peel away the plastic screw cover with tweezers.
Remove the plastic cover and pack of weights.
Remove the two 1.0 mm foam covers with tweezers.
Peel away the plastic screw cover with tweezers.
1024
Step 2
- Remove the four 1.0 mm screws with a Ph #1 screwdriver.
- Gently remove the top of the mouse.
Remove the four 1.0 mm screws with a Ph #1 screwdriver.
Gently remove the top of the mouse.
Step 3
5-pin USB Cord
- Locate the 5-pin connector on the mouse’s motherboard.
- Use the tweezers to carefully pull the 5-pin connector off. Do this by grasping the connector and wiggling it back and forth until it is off.
- Once removed, place new 5-pin connector on in the same way.
Locate the 5-pin connector on the mouse’s motherboard.
Use the tweezers to carefully pull the 5-pin connector off. Do this by grasping the connector and wiggling it back and forth until it is off.
Once removed, place new 5-pin connector on in the same way.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 2 other contributors
Grace Neville
Member since: 04/05/2018
141 Reputation
1 Guide authored
Badges:
5
+2 more badges
Team
Linn Benton Community College, Team S2-G3, Johnson Spring 2018
Member of Linn Benton Community College, Team S2-G3, Johnson Spring 2018
LBCC-JOHNSON-S18S2G3
4 Members
5 Guides authored