Difficulty

Moderate

Steps

3

Time Required

Suggest a time??

Sections

1

  • Monitor panel
  • 3 steps

Flags

2

Bullets!

Better coordination with markups and the color/type of bullets will help make this guide more clear!

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackLenovo ThinkVision M14 Portable Monitor

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Removing the display bezel
  • Remove the display bezel. It is held on by 2-sided tape. Removal is easier if you apply gentle heat to soften the tape.
  • The bezel is taped in on all sides. Start from the sides and work your way around. Take care not to deform or bend the bezel.

Remove the display bezel. It is held on by 2-sided tape. Removal is easier if you apply gentle heat to soften the tape.

The bezel is taped in on all sides. Start from the sides and work your way around. Take care not to deform or bend the bezel.

1024

Step 2

              Removing the panel
  • The panel is held in with three strips of 10mm wide ~0,5-0,8mm thick strechy adhesive tape between the back of the panel and the magnesium case. Removal is difficult. Heating the case from the back can help. If the panel is already broken it is ok to force it out with a pry tool.
  • Pay attention not to damage the display cable located in the lower left corner of the panel.
  • Wear safety goggles since the display panel is glass and will shatter if bent.

The panel is held in with three strips of 10mm wide ~0,5-0,8mm thick strechy adhesive tape between the back of the panel and the magnesium case. Removal is difficult. Heating the case from the back can help. If the panel is already broken it is ok to force it out with a pry tool.

Pay attention not to damage the display cable located in the lower left corner of the panel.

Wear safety goggles since the display panel is glass and will shatter if bent.

Step 3

              Removing the display cable
  • The display cable is very delicate. Pay attention when removing it.
  • Peel off the metal tape and pull the cable out towards the lower side of the panel. Do not lift upwards on the cable.

The display cable is very delicate. Pay attention when removing it.

Peel off the metal tape and pull the cable out towards the lower side of the panel. Do not lift upwards on the cable.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 1 other contributor 


                    Mihail Tchetchelnitski

Member since: 05/30/2021

124 Reputation

                                      1 Guide authored                  



                       Badges:
                       4







                                                        +1 more badge